HomeMy WebLinkAboutResolution - 2016-R0401 - Purchase Order - Robert's Truck Center - Utility Vehicles - 11_03_2016Resolution No. 2016-RO401
Item No. 6.14
November 3, 2016
RESOLUTION
BE IT RESOLVED BY THE CITY COUNCIL OF THE CITY OF LUBBOCK:
THAT the Mayor of the City of Lubbock is hereby authorized and directed to execute for
and on behalf of the City of Lubbock, Purchase Order No. 31029878, ITB 16-13036-SS, for the
purchase of Utility Vehicles, by and between the City of Lubbock and Robert's Truck Center of
Texas, LLC, of Lubbock, Texas, and related documents. Said Purchase Order is attached hereto
and incorporated in this resolution as if fully set forth herein and shall be included in the minutes
of the City Council.
Passed by the City Council on November 3, 2016
L'i - /,--
DANIEL M. POPE —,MAYOR
ATTEST:
A�- .4C...c
""
Rebecca tarza, City Secret
APPROVED AS TO CONTENT:
61
Scott Snider, Assistant City Manager
APPROVED AS TO FORM:
K lli Leisure, Assistant City Attorney
RESTO #31029878-Robert's Truck Center of Texas, LLC
10.20.16
\ A , j
*`��
' T> City of
Lubbock_
TEXAS
We]
PURCHASE ORDER
ROBERTS TRUCK CENTER OF
4510 AVE A
LUBBOCK Texas 79404
SHIP TO:
Page -
Date -
Order Number
1
10/19/2016
31029878 000 OP
526
CITY OF LUBBOCK
FLEET SERVICES
206 MUNICIPAL DRIVE
LUBBOCK Texas 79404
INVOICE TO: CITY OF LUBBOCK
ACCOUNTSPAYABLE
P.O. BOX 2000
LUBBOCK, TX 79457 BY:
-WAk4l\l
Marta Alvarez, Director of Pu asing & Contract Management
Ordered 10/19/2016 Freight
Requested 05/03/2017 Taken By S SUMMERS
Delivery PER D GAMBOA REQ #48364 ITB 16-13036-SS
Description/Supplier Item Ordered Unit Cost UM Extension Request Date
Truck Tractor with Fifth Wheel 1.000 99,763.0000 EA 99,763.00 05/03/2017
Specification No. 641-SW
Truck Crew Cab w/Dump Body 1.000 94,928.1800 EA
Specification No. 606-ST
Total Order
Terms NET DUE ON RECEIPT
94,928.18 05/03/2017
194,691.18
This purchase order encumbers funds in the amount of $194,691.18 awarded Robert's Truck Center of Texas, LLC of Lubbock, TX
on November 3, 2016. The following is incorporated into and made part of this purchase order by reference ITB 16-13036-SS dated
October 6, 2016 Robert's Truck Center of Texas, LLC of Lubbock, TX Resolution # 2016-RO4 1
CITY OF LUBBOC
Daniel M. Pope, Mayor
ATTEST:
Rebec a Garza, City Secretary
Bid Form
Various Utility Vehicles
City of Lubbock, TX
ITB 16-13036-SS
In compliance with the Invitation to Bid 16-13036-SS, the undersigned Bidder having examined the Invitation to Bid and
Specifications, and being familiar with the conditions to be met, hereby submits the following Bid for furnishing the material, equipment,
labor and everything necessary for providing the items listed below and agrees to deliver said items at the locations and for the prices
set forth on this form. A bid will be subject to being considered irregular and may be rejected if it shows omissions, alterations of
form, conditional alternate bids, additions or alternates in lieu of the items specified, if the unit prices are obviously unbalanced (either
in excess of or below reasonably expected values), or irregularities of any [rind. The Invitation to Bid 16-13036-SS is by reference
incorporated in this contract. The Bid Form must be completed in blue or black ink or by typewriter.
Unit
ITEM
QTY
of
DESCRIPTION
UNIT PRICE'
Delivery (Days)
(+/-)
Measure
BID
ARO04
t. - - -
- - t -
- -Each- -
One -Ton Crew Cab-DRW, 4x4,
���
_ _ _ _ _ _ _ _
Specification No. 6513 1 Ton
- - -
ModeLYear, Dmnd.Name and -Model Numbee; - -
Truck Tractor, 80,000 lb. GCVWR
/80 6h7
2.
1
Each
w/adjustable Fifth Wheel, per
$ qq�
Specification No. 641-SW
Model Year, Brand Name and Model Number:
3.
1
Each
Truck Crew Cab w/6 Yard Dump Body,
I
per Specification No. 606-ST
7 7�
j-�c� d feoc- °-
Model Year, Brand Name and Model Number:
One -Ton Pick-up Truck, Regular Cab,
- -Eacir -
Mint Rear Wheels,Ter-Speciftcatiorr - - -
1661
- - - -At- f A- - -f
- - - - - - -
I-CEM
- -
Model Year, -Brand Name-and-lvlodet- i err Total: $194 , 6 91 . 18
;PRICE: F.O.B. Destination, Freight Pre -Paid and Allowed °*ARO - After Receipt of Order
Unless otherwise specified herein, the City may award the bid either item -by -item or on an all -or -none basis for any item or
group of items shown on the bid.
PAYMENT TERMS AND DISCOUNTS -Bidder offers a prompt payment discount of _ %, net calendar days. Unless
otherwise indicated on the Bid Form, payment terms will be NET THIRTY DAYS. The City will pay the successful bidder within thirty
days after the receipt of a correct invoice or after the date of acceptance, whichever event occurs later. Discounts for prompt payment
requiring payment by the City within a stipulated number of days will be interpreted as applying within the stipulated number of calendar
days after the date of receipt by the City of a correct invoice or afler the date of acceptance that meets contract requirements, whichever
event occurs later, Discounts for payment in less than ten days will not be considered.
MOST FAVOURED PRICING: The Bidder certifies that the price quoted is not in excess of the lowest price charged anyone else,
including its most favoured customer, for like quality and quantity of the products/serviees; does not include an element of profit on the
sale in excess of that normally obtained by the Bidder on the sale of products/services of like quality and quantity; and does not include
any provision for discounts to selling agents. If at any time during the contract period, the supplier should sell or offer for sale to any
other customer, an equal or less quantity of similar contract products of like or better quality, at a lower tnet price(s) than provided herein,
supplier agrees to notify the City and sell same product(s) at the lower price(s) on all deliveries made during the period in which such
lower price(s) is effective.
S Purchase/Bid Docs/]TB 16-13036-SS Various Utility Vehicles
PAGE 1 OF 41 Department/Cost Center requesting vehicle/equ
DATED: 9/08/2016 Spec Content Reviewed & Approved by:
Department Head Authorizing Release of Spec:
Date:
Is] I It LI] "I'V3. 3iZWI
MINIMUM SPECIFICATIONS
TRUCK TRACTOR, 80,000 LB GCVWR
WITH ADJUSTABLE FIFTH WHEEL to be used with a
BOTTOM DUMP TRAILER
SPECIFICATION NO.: 641-SW
1'EAR20 1:1_DIAKE kr C00P-T7'i MODEL 79,66
IT IS THE INTENT OF THIS SPECIFICATION, REFERENCED DOCUMENTS, REQUIREMENTS AND CONDITIONS SECTIONS TO DESCRIBE MINIMUM
PERFORMANCE REQUIREMENTS THE VEHICLE OR PRODUCT MEET OR EXCEED THE PERFORMANCE OR CONSTRUCTION DESCRIBED HEREIN.
THE VENDOR SHALL BE REQUIRED TO MARK COMPLIANCE OR NON-COMPLIANCE TO EACH ITEM DESCRIPTION IN THE SPACE PROVIDED. ALL
EQUIPMENT FURNISHED AS STANDARD TO THE GENERAL PUBLIC ON THE PRODUCT BY THE MANUFACTURER SHALL BE INCLUDED, EVEN
WHEN NOT SPECIFICALLY IDENTIFIED IN THIS SPECIFICATION. ANY DEVIATIONS FROM THE WRITTEN SPECIFICATION WITH DATE AS SHOWN
IN THE INVITATION TO BID (ITB) SHALL BE NOTED ON THE ATTACHED EXCEPTIONS TO THE SPECIFICATION. IN ORDER TO RECEIVE FULL
CONSIDERATION, ITB RESPONSE QUOTATION MUST FOLLOW
�� THIS SPECIFICATION AND THE INVITATION TO BID'S TERMS AND CONDITIONS.
VENDOR NAME: P Og eg T % PHONE: (Rel') -G 3- q Z. 13
NO. ITEM MINIMUM REQUIREMENTS SELLER COMPLIANCE
YES NO
GENERAL
80,000 GCVWR POUND TRUCK TRACTOR WITH
CONVENTION CAB AND A SLIDING FIFTH WHEEL TO
BE USED WITH A BOTTOM DUMP TRAILER.
I.
GVWR
OEM GROSS COMBINATION WEIGHT RATING OF NOT
✓
LESS THAN 80,000 POUNDS.
2.
ENGINE
DIESEL FUEL TURBOCHARGED ENGINE CAPABLE OF
OPERATION ON #2 DYED DIESEL. ENGINE RATED AT
/
350 HORSEPOWER WITH A MINIMUM TORQUE RATING
'✓
OF 1450 FT LBS.
THE ENGINE SHALL INCLUDE THE FOLLOWING
FEATURES:
BLOCK HEATER: IIOV-AC BLOCK HEATER, WITH
GROUNDED EXTENSION AND PLUG.
r/
AIR CLEANER: OEM HEAVY DUTY DRY ELEMENT
TYPE AIR CLEANER AND INCLUDES AN IN CAB AIR
RESTRICTOR GAUGE.
COOLING: OEM HEAVY DUTY COOLING SYSTEM
EXHAUST: EXHAUST SYSTEM WITH SINGLE VERTICAL
MUFFLER AND PIPE MOUNTED ON THE RIGHT SIDE OF
CAB. THE EXHAUST SYSTEM MUST INCLUDE A HEAT
SHIELD WHERE STACK TERMINATES TO PREVENT
ACCIDENTAL BURNS TO EMPLOYEES. SYSTEM MUST
BE WITHIN: HEIGHT - I4'.3" & WIDTH - 12".
SAFETY ALERTS: WARNING INDICATOR LIGHT AND
BUZZER TO WARN OPERATOR OF HIGH COOLANT
TEMPERATURE AND LOW ENGINE OIL PRESSURE.
3.
WHEEL BASE
WHEEL BASE SHALL BE DOT APPROVED FOR
COMBINED GVWR TRUCK -TRACTOR -TRAILER
COMBINATION.
4.
FRONT AXLE
.16,000 POUND AXLE RATING WITH OIL LUBRICATED
BEARING, SEALS AND HUBS. SHOCK ABSORBERS
S: Purchase/Bid Docs1ITB 16.13036-SS Various Utility Vehicles
SHALL BE THE HEAVY DUTY KIND AND CAPABLE OF
SUPPORTING THE AXLE WEIGHT.
5.
REAR AXLE
THE REAR AXLE SHALL BE TANDEM DRIVE TYPE. THE
REAR AXLE SHALL BE DESIGNED WITH A MINIMUM
46,000 POUND CAPACITY WITH OEM HEAVY DUTY
TYPE SUSPENSION. THE AXLE RATION SHALL PROVIDE
MAXIMUM START ON GRADE TORQUE OF 65 MPH ON A
GOVERNED RPM.
6.
FRAME
FRAME RAIL SHALL BE OEM RATED FOR SEMI -
TRACTOR APPLICATION AND SHALL BE WARRANTED
FOR STRESS CRACKING OR DEFORMATION FOR NOT
LESS THAN 100,000 MILES. THE FRAME SHALL BE
EQUIPPED WITH TWO FRONT MOUNT TOWING
DEVICES WITH 15% DEGREE CLEARANCE FOR ACCESS
TO THE TOW DEVICES.
7.
WHEELS
10 HOLE DISK TYPE WHEEL ARE REQUIRED.
8.
TIRES
TIRE MUST BE OF THE PROPER SIZE TO MEET THE
CAPACITY RATING FOR ALL AXLES & GCVWR. THE
MINIMUM RATING OF THE WHEEL AND TIRE
COMBINATION SHALL BE BASED ON THE LOADED
CAPACITY OF THE FRONT AND REAR AXLES. TIRE AND
WHEELS WILL NOT REDUCE THE AXLE RATED
CAPACITY IN ANY FORM OR FASHION NOR THE GVWR
OF THE VEHICLE.
9.
CAB
OEM CONVENTION FULL WIDTH CAB WITH ALL
COMPONENTS OFFERED TO THE GENERAL PUBLIC.
THE CAB SHALL INCLUDE THE FOLLOWING:
SEAT: SEATS SHALL BE THE AIR RIDE DESIGN AND BE
FULLY ADJUSTABLE. THE SEATS SHALL BE CLOTH
COVERED
HEATER/ DEFROSTER: OEM WITH MULTI -SPEED FAN
AIR CONDITIONING: OEM AIR CONDITIONER WITH
DASH MOUNTED OUTLET AND MULTI -SPEED FANS.
RADIO: OEM WITH AM/FM WITH CLOCK AND DUAL
SPEAKERS
GLAZING: OEM DARKEST TINTED IN ALL WINDOWS.
INTERIOR LIGHT: OEM INTERIOR DOME LIGHT
HOOD: OEM TILT DESIGN HOOD
BUMPER: OEM FULL WIDTH FRONT BUMPER.
HORNS: OEM AIR HORN WITH CONTROLS
WIPERS/WASHERS: OEM TWO SPEED WITH
✓
INTERMITTENT FEATURES AND WASHER.
MIRRORS: 6" x16" STAINLESS STEEL WEST COAST
TYPE ON BOTH THE DRIVER AND PASSENGER'S SIDES
OF THE VEHICLES. MIRROR SHALL BE INSTALLED AS
RECOMMENDED BY MANUFACTURER.
10.
TRANSMISSION
OEM AUTOMATIC TRANSMISSION
11.
BRAKES
THE BRAKE SHALL BE THE FULL AIR DESIGN WITH S-
CAM FUNCTION AND OUTBOARD MOUNTED DRUMS
WITH REMOVABLE BACKING PLATE.
S: Purchase/Bid Docs/11B 16-13036-SS Various Utility Vehicles
TRAILER COUPLER: OEM SEMI TRAILER PLUMBING
WITH COILED TRAILER AIR LINES WITH GLAD HAND
COUPLERS AND AIR CONTROL MOUNTED IN CAB OF
VEHICLE.
AIR MOISTURE DRAIN: OEM SUPPLIED AIR MOISTURE
DRAIN AND DRY SYSTEM.
✓
12.
STEERING
OEM HYDRAULIC POWERED ASSISTED STEERING.
13.
ELECTRICAL
OEM ELECTRICAL SYSTEM WITH HEAVY DUTY
SYSTEMS
ALTERNATOR
✓
WIRE LOOM: ALL WIRING MUST BE CONTAINED INA
WIRE LOOM AND RUBBER GROMMETS MUST BE USED
ANYWHERE THE WIRE LOOM PASSES THROUGH ANY
METAL COMPONENT OR BODY METAL.
LIGHTING: THE TRACTOR MUST CONFORM TO ALL
CURRENT OVER THE ROAD DOT LIGHTING
f
REQUIREMENTS.
BACK UP ALARM: OEM STANDARD ACTIVATED WHEN
✓
TRACTOR IS PLACED IN REVERSE.
14.
COLOR
THE COLOR SHALL BE FLEET WHITE CAB AND WHEELS
WITH BLACK CHASSIS.
15.
FUEL TANKS
DUAL STEP SINGLE FUEL TANK MOUNTED BELOW THE
✓
CAB WITH A CAPACITY OF 100 GALLONS.
16.
INSTRUMENT PANEL
OEM STANDARD GAUGES TO INCLUDE: TACHOMETER,
HOUR METER, FUEL LEVEL, ENGINE OIL PRESSURE,
ENGINE COOLANT TEMPERATURE, TRANSMISSION OIL
TEMPERATURE, AMP OR VOLT METER AND AIR
PRESSURE.
17.
FIFTH WHEEL
OEM MOUNTED FIFTH WHEEL. THE FIFTH WHEEL
SHALL BE A SLIDING HOLLAND KOMPENSATOR TYPE
OR CITY APPROVED EQUAL. THE FIFTH WHEEL SHALL
HAVE A TOP SURFACE HEIGHT OF 52 TO 55 INCHES
ABOVE GROUND LEVEL AND BE MOUNTED
APPROXIMATELY 12 INCHES AHEAD OF THE TANDEM
CENTER LINE.
18.
FIFTH WHEEL
THE FIFTH WHEEL SLIDE BASE LOCATION SHALL
LOCATION
PROVIDE TRAVEL BETWEEN SIX (6) INCHES BEHIND
/
THE TRUNNION AND NOT LESS THAN 18 INCHES
FORWARD OF THE TRUNNION.
19.
WARRANTY
OEM STANDARD TIME AND MILEAGE COVERAGE AND
ScZ'
INCLUDE WRITTEN DETAILS ON THE COMPONENTS
COVERED AND NOT COVERED.
✓
/�c
MILES TIME FRAME
Cv fb�
20
WARRANTY SUPPORT
THE VENDOR SHALL PROVIDE SUPPORT FOR
WARRANTY REPAIRS WITHIN 48 HOURS OF
NOTIFICATION BY THE CITY. TRANSPORTATION
BEYOND THE CITY LIMITS FOR WARRANTY REPAIR IS
THE RESPONSIBILITY OF THE VENDOR AND WILL NOT
BE CHARGED TO THE CITY.
OPTION
S: Purchase/Bid Docs/11'B 16-13036-SS Various Utility Vehicles
21.
EXTENDED
WARRANTED MUST LIST IN WRITING ALL
WARRANTY
COMPONENTS COVERED AND NOT COVERED
.5OO 600 MILES TIME FRAME
r
.0 r-� �,.��-, f�� mow,
PROVIDE BUILD DATES IN SPACE BELOW
j� o— is,v b&I/S
BUILD DATE:
MSO AND PAPERWORK
Vehicle/equipment will not be accepted by the City of Lubbock without
the MSO, all keys, and all paperwork
GENERAL REOUiREMENT AND INFORMATION
Bidder shall submit with each bid, current printed literature and specification sheets on the unit offered in the response to solicitation.
Exceptions to the specifications of any items stated herein shall be fully described in writing by the bidding vendor in the space
provided below. List items by item numbers.
S: Purchase/Bid Docs/ITB 16-13036-SS Various Utility Vehicles
r
SUMMIT KENWORTH D141 (CITY of LUBBOCK
4510 AVENUE A 162513th Street, RM 204
LUBBOCK, Texas United States 79404 Lubbock, Texas United States 79401
Phone: (806) 763-8213 Phone: (806) 762-6411
Fax: (806) 744-4117 Fax:
Email: tonydavis@robertstruck.com Contact Email:
Prepared for: Marta Alvarez
Customer Quote
Equipment
Quantity Ordered:
1
Truck Price:
$195,095
Dealer Options:
$0
Equipment List Price:
$195,095
Surcharges Not Subject to Discount:
$0
Options Not Subject to Discount:
$0
Factory Freight Cost:
$2,225
Total Equipment Price: $197,320
NET Sale Price: $99,763
Miscellaneous
FET Tire Credit: $0
Net Chassis FET: $0
State Tax: $0
Body/Trailer/Accessories FET: $0
Fees: $0
Other: $0
Quotation Total: $99,763
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed 10/4/2016 9:22:26 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
0 KENW4RTH
SUMMIT KENWORTH D141 CITY of LUBBOCK
4510 AVENUE A 1625 13th Street, RM 204
LUBBOCK, Texas United States 79404 Lubbock, Texas United States 79401
Phone: (806) 763-8213 Phone: (806) 762-6411
Fax: (806) 744-4117 Fax:
Email: tonydavis@robertstruck.com Contact Email:
Prepared for: Marta Alvarez
Vehicle Summary
Unit
Model: T800 Series Conventional.
Type: TRACTOR
Description: 2017 Kenworth T800
Application
Intended Serv.: Local pickup & delivery.
Vehicles which haul
Commodity: Gravel/crushed rock/sand
Body
Type:
Length (ft): 0.0
Height (ft): 0.0
Max Laden Weight (Ibs): 0
Trailer
No. of Trailer Axles: 2
Type: Bottom dump
Length (ft): 48.0
Height (ft): 11.6
Kingpin Inset (in): 36
Corner Radius (in): 2
Restrictions
Length (ft): 120
Width (in): 102
Height (ft): 13.5
Approved by:
Chassis
Fr Axle Load (Ibs):
16000
Rr Axle Load (Ibs)
46000
G.C.W. (Ibs):
80000
Road Conditions:
Class A (Highway)
80
Class B (Hwy/Mtn)
20
Class C (Off -Hwy)
00
Class D (Off -Road)
00
Maximum Grade:
6
Wheelbase (in):
193
Overhang (in):
64
Fr Axle to BOC (in):
74
Cab to Axle (in):
119
Cab to EOF (in):
183
Overall Comb. Length
770
(in):
Special Req.
U.S. Domestic Registry, 50-State
Date:
Note: All sales are F.O.B. designated plant of manufacture.
Ask your dealer for a quote today, or visit our website @ www.paccarfinancial.com.
FINANCIAL PACCAR Financial offers innovative finance, lease and insurance programs
customized to meet your needs.
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul 1, 2016 Quote/DTPO/CO: 055614090
Prepared by: Tony L Davis Version Number: 38.20
37663-931F-0533 Page 1 of 12
KENWORTH
SUMMIT KENWORTH D141 CITY of LUBBOCK
4510 AVENUE A 162513th Street, RM 204
LUBBOCK, Texas United States 79404 Lubbock, Texas United States
79401
Phone:
(806) 763-8213 Phone: (806) 762-6411
Fax:
(806) 744-4117 Fax:
Email:
tonydavis@robertstruck.com Contact Email:
Prepared for: Marta Alvarez
Data
Code Description
$ List Weight
Model
0000800
O T800 Series Conventional.
162,600 15,309
Elastomer bushed front spring pins & heavy-duty shock absorber brackets,
16mm. fasteners from rear cab support to end -of -frame, except tractor
taper crossmember. Vinyl inside sunvisors, driver side includes strap &
mirror, rider side includes strap; Under -dash center console w/ 2 cup
holders, 2-12V outlets & a storage compartment, Glove box door with
locking latch.
0070066
O T1300: Sloped Hood.
0 0
0072000
O Chassis operation will not include
0 0
a stationary application. Stationary operation is defined as running the
engine under load while stationary at a substantial fraction of engine gross
horsepower (60% or greater) for an extended period of time (longer than 5
- 10 minutes).
0080075 O
Dealer/Customer declines engine w/CARB Idle
0 0
Emissions Reduction Feature.
0090000 O
Non -Sleeper w/rear axle capacity less than 59K.
0 0
0091042 O
Gravel/crushed rock/sand
0 0
0093005 O
Local pickup & delivery. Vehicles which haul
0 0
freight, typically operating within a 100-mile radius, on public streets &
highways, & other paved surfaces, including limited Class C roads.
Includes package & freight delivery, as well as fuel oil or petroleum
distribution, etc. Road usage: minimum 3% Class B, do not code for Class
D.
0096030 O
Bottom dump
0 0
0098025 O
U.S. Domestic Registry, 50-S6te
0 0
Engine & Equipment
0700580 O
PACCAR MX-13 380 2013+ 380@1700 1450@1000
0 0
with engine brake.
N08000 N219 0.... Offset mode
N08030 N224 2.... Maximum Vehicle Speed Bonus
N08040 N227-2... Maximum Vehicle Speed Penalty
N08190 N246 4.... Minimum Vehicle Speed for DSA Activation
N08200 N247 1.... Lowest Gear that DSA will be active
N08210 N248 10... Highest Gear that DSA will be active
N09020 N170 120..Standard Maximum Speed Limit [LSL]
N09030 N169 0....VSL Expiration Distance
N09040 N162 65... Maximum Accelerator Pedal Vehicle Speed
N09060 N163 0.... Maximum Cycle Distance
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by, Tony L Davis Version Number: 38.20
37663-931F-0533 Pave 7 of 1)
JLJ KENWORTt
Data Code Description
N09070 N052 650..Engine Idle Speed
N09100 N015 NO ... Enable Retarder During Manual Transmission Gear
Selection
N09110 N019 0.... Delay in Engine Brake Activation w/ Brake Pedal
Depressed
N09120 N014 2.... Auto Retard Vehicle Speed Offset
N09130 N013 4.... Downhill Speed Limiter Vehicle Speed Offset
N09140 N006 65... Max Cruise Speed
N09150 N001 16... Minimum Speed to Turn Cruise Control Off
N09160 N003 19... Minimum Cruise Control Speed
N09170 N002 19... Min Speed to Automatically Turn Cruise Control On
N09180 N005 1.... Value to Increase Speed w/ SetAccel Bump Switch
N09190 N004 1.... Value to Reduce Speed w/ Resume/Decel Bump
Switch
N09200 N039 OFF..AIIow Multi -Torque Only When Cruise is Active
N09210 N193 0.... EIST Expiration Distance
N09220 N 188 5.... Timer Setting Non -PTO Mode w/o Park Brake Set
N09230 N187 5.... Timer Setting Non -PTO Mode w/ Park Brake Set
N09240 N194 60... Timer for Impending Shutdown Warning
N09250 N190 YES..Reset EIST Timer Based on Engine Load
N09260 N191 NO ... Overrule EIST Timer Based on Engine Load - No
Shutdown
N09270 N183 35... Engine Load Threshold
N09280 N186 5.... Timer Setting When in PTO Mode
N09290 N200 YES..AIIow EIST Timer Overrules in PTO Mode
N09300 N185 40... Low Ambient Temperature Overrule
N09310 N 184 80... High Ambient Temperature Overrule
N09350 N197 YES..Enable Accelerator Pedal Reset
N09360 N199 YES..Enable Clutch Pedal Reset
N09370 N198 YES..Enable Service Brake Reset
N09380 N071 ON ... FIC Enable/Disable
N09390 N072 1900.Maximum Fast Idle Control Engine Speed
N09400 N105 100..Decrease Engine Speed w/ Res/Decel Bump Switch
N09410 N107 100..Increase Engine Speed w/ SeUAccel Bump Switch
N09420 N104 250..Rate to Decrease Engine Speed w/ Res/Decel
Switch Held
N09430 N103 350..Rate to Increase Engine Speed w/ SetAccel Switch
Held
N09440 N080 1.... PTO Vehicle Speed Limit
N09450 N078 ON ... PTO Mode Disabled w/ Clutch Pedal Depressed
N09460 N101 ON ... PTO Mode Disabled w/ Service Brake Depressed
N09470 N079 ON ... PTO Mode Enable Only w/ Parking Brake Set
N09480 N089 ON...PTO Mode Enable Only w/ Transmission Neutral
N09490 N082 50... Reduce Engine Speed w/ Resume/Decel Switch
Bump
N09500 N083 50... Increase Engine Speed w/ SeUAccel Switch Bump
N09510 N084 250..Rate of Decrease in Engine Speed w/ Switch Held
Down
N09520 N085 350..Rate of Increase in Engine Speed w/ Switch Held
Down
N09530 N110 ON ... Enable Set Point w/ SeUAccel Switch Bump
N09540 N087 780..RPM Set Point
N09550 N086 2000.Maximum Engine Speed During PTO Operation
$ List Weight
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date:
Prepared by:
Jul 1, 2016
Tony L Davis
Quote/DTPO/CO:
Version Number:
Q55614090
38.20
37663-931F-0533 Paae 3 of 12
jigKENW4RtH
Data Code
Description
$ List Weight
_
_ _
N09560 N090 50...Reduce Engine Spd w/ Remote Res/Decel Switch
Bump
N09570 N092 50... Increase Engine Spd w/ Remote Set/Accel Switch
Bump
N09580 N091 200..Rate of Decrease in Engine Speed w/ Switch Held
Down
N09590 N093 250..Rate of Increase in Engine Speed w/ Switch Held
Down
N09600 N106 660..Minimum Engine Speed During PTO Operation
N09610 N077 1902.Maximum Engine Torque During PTO Operation
N09620 N109 NO ... Enable PTO Speed Maxium Rate of Change
N09630 N081 75... PTO Speed Maximum Rate of Change
N09640 N173 0.... Reserve Speed Offset
N09820 N065 5.... HEST Warning Minimum Vehicle Speed
N09840 N179 YES..Enable Park Brake Reset
N09880 N164 252..Reserve Speed Function Reset Distance
N09900 N182 30... Coolant Temperature Overrule
N09920 N073 Trq..Cab Accel Pedal Type in PTO Mode
N09940 N055 780..RPM Set Point 1
N09960 N056 1030.RPM Set Point 2
1000153 O
Prospector Version 38.2
0 0
Replaces version 38.1
1000204 O
Engine monitoring protection -berate- PACCAR MX
0 0
engine parameter.
1000243 O
Gearing Analysis: Performance
0 0
power before economy results.
1000254 O
Customer's Typical Operating Spd: 85 mph.
0 0
1000283 O
MX Retarder State Cruise Control On Coast Mode _
0 0
Selecting this code will program the engine controller to make coast mode
available when cruise control is on, but not set, and the engine brake
switch is on. Coast mode means the engine retarder is only activated
when the brake pedal is depressed. 2013+
1000285 O
Enable MX Retarder Auto -Retard
0 0
Selecting this code will program the engine to utilize the auto retard mode
whenever cruise control speed has been set and the engine brake switch
is on. The auto -retard mode will control the vehicle speed to an offset from
the cruise control set speed via the engine retarder. The offset speed shall
be dependent upon customer inputs via the electronic programming work
screen. 2013+
1000350 O
PTO Speed control from cab station wl o acc-
0 0
-elerator pedal, PACCAR MX engine parameter.
1000683 O
Effective VSL Setting 65.0 MPH (USA)
0 0
1000858 O
Engine Idle Shutdown Timer Disabled
0 0
1000859 O
Enable EIST Ambient Temp Overrule
0 0
1000891 O
Eff EIST NA Expiration Miles
0 0
Use only with MX and Cummins engines
1006002 S
Air compressor: WABCO 28 CFM PACCAR MX.
0 0
Unpublished options may require reviewlapproval.
Dimensional
and performance data for unpublished options may vary from that displayed in PROSPECTOR,
Printed:
10/4/2016 9:22:41 AM Complete Model Number:
T800 Series Conventional.
Effective Date:
Jul 1, 2016 Quote/DTPO/CO:
Q55614090
Prepared by:
Tony L Davis Version Number
38.20
37663-93IF-0533 Page 4 of 12
�H KENWORTH
Data Code
Description
$ List
Weight
1051086 S
Air cleaner: Powercore engine mount 10 in.
0
0
w/constant torque SS clamps, pop-up air restriction indicator. Holds 10%
more fine dust than 2500. Pop-up indicator is standard.
y110521 0O
Fan hub: Horton 2-Speed for PACCAR MX
259
0
112 6640 S
Cooling module: T8SHIT88M9S 1440 square inches.
0
0
Includes aluminum radiator core, aluminum charge air cooler, translucent
surge tank and washer bottle, silicone hoses, and extended life coolant.
Drain valve is not available w/Allison transmissions.
1247150 S
RH under cab DPF/SCR w/ RH SOC vertical tailpipe.
0
0
For use w/ daycabs, extended daycabs, or modular sleepers. T660
requires split fender hood.
1290136 O
Tailpipe: 5 in. single 36 in. 45 degree curved. �^
0
0
1328135 O
PACCAR Fuel filter/water separator, Unheated.
-65
-2
For PACCAR MX 2013+
1504005 O
Immersion block heater 120V 150OW w/plug under
108
2
door on C500, T660, T800 & W900.
1816260 S
Alternator: PACCAR 160 amp, brush type
0
0
1821210 S
Batteries: 3 PACCAR GP31 threaded post (700) 2100
0
0
CCA dual purpose.
1836100 S
Starter: PACCAR 12 volt electrical system. W/
0
0
centralized power distribution incorporating plug-in style relays. Circuit
protection for serviceability, 12-volt light system w/circuit protection circuits
number & color coded.
1900084 S
Multi -function engine connector for body builder
0
0
interface PACCAR MX engine only. T680/T880: This feature is standard,
no code required.
Transmission & Clutch
2038250 O Forward Creep Mode Enabled
2038251 O
2058422 O
Reverse Creep Mode Enabled
FLR ADV AUTOMATED FAO-14810C-EA310SPD
NO COOLER W/HSA *USE W/2250385 ONLY
0 0
0 0
6,282 111
2250385 O Clutch:UltraShift Plus OR Fuller Advantage Series 0 0
Automated transmissions.
2405405 O Driveline: 2 Dana 1810 heavy-duty 1 centerbearing 681 99
'Hvy duty is 1810 series.
2429100 O Chassis will be fitted w/LH transmission PTO. 0 0
(PREVENTS ECU F/INTERFERING W/PTO ONLY)
Front Axle & Equipment
2506181 O Dana Spicer D2000 Front Axle rated 20K 2,192 120
standard track.
2601608 O Front Brakes, 18K Bendix RSD HP -ES S-Cam 16.5x6 165 -44
in. drum brake, Max GAWR 18K, with Cast Spider.
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed. 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
37663-931F-0533 Pame 5 of 12
KENWORTH
Data
Code
Description
$ List
Weight
2690035
O
Front Brake Drum: 22,000 Ibs.16-1/2x6 in. Cast.
-113
104
2702018
O
Front Hubs Iron hub pilot 18,000 lbs.
315
80
16.5x6in. or Tin. or air disc brakes. 10 Bolt, 11-1/4 in. bolt circle. Consider
Wheelguards (5850002) with aluminum wheels.
2741970
S
ConMet Preset Plus Hub package; front axle.—
0
0
2750001
S
Hubcap: front vented.
0
0
2765001
O
Front Auto Slack Adjuster.
0
0
2864016
O
Front Springs: Taperleaf 16K w/shock absorbers
719
121
w/ maintenance -free elastomer spring pin bushings. Standard with rubber
pins except for C500 which has threaded pins. Not available on W900L.
2893881
O
Single power steering gear: 16K TRW TAS85
539
18
W9B available, but not available W9S, W9L or T3.
2900616
O
Threaded Bushings for taperleaf spring
97
0
16K, 18/20K, 22K, 40K replacing rubber.
Rear Axle & Equipment
3144172
O
Dual Dana Spicer D46-170H rear axle rated at 46K.
3,622
577
w/ 16mm housing and 2.06in. shaft diameter. Tandem rear axles.
3200410
O
Rear Axle Ratio - 4.10.
0
�0
3304012
O
RR BRK:BENDIX RSD 16.5X7 DUAL 46K CAP
-8
24
REDUCED STOPPING DISTANCE TRACTOR ONLY. RSD-Compliant
HP -ES S-Cam, tandem axle drum brake.
3392005
S
Dual Rear Brake Drums: cast.
0
0
3407050
S
Dual Rear Hubs: Aluminum hub pilot 46K
0
0
11-1/4 in. bolt circle.
3441972
S
ConMet Preset Plus Hub package; dual rear axle.
0
0
3465002
S
Dual Rear axle automatic slack adjusters.
0 0
3485207
O
Spring Brake: 3030 long stroke dual 30 square
29 4
inches travel; replaces standard 2-1/2 in. travel. Helps keep brakes in
adjustment longer.
3495230
O
Bendix 6S/6M anti -lock brake system w/ air
1,139 6
traction control (ATC).
3500037
O
Interaxle driveline:1 Dana 1710 Series
0 0
3747461 O Rear suspension: Tandem Hendrickson RT463 46K. 2,804 573
54 in. axle spacing. Steel beams & barpin bushing. 7.19 in. saddle height.
Unladen Height: 12.5 in. Laden Height: 11.2 in.
3832008 0 Heavy-duty torque rods for Hendrickson beam. 348 15
46K and under suspensions.
Tires & Wheels
4070009 O FR: BRIDGESTONE R249 315/80R 22.5 20PR 868 26
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
37663-931F-0533 Paee 6 of 12
Data
�4277382
Code
Description
$ List
Weight
O
Rear tires: Bridgestone M843 11R22.5 14PR.
928
0
25/32 tread depth all position. On/off highway. 42.5 in. diameter. 19.9 in.
SLR. Code is priced per pair of tires.
4900008
O
Rear Tire Quantity: 8
0
0
5042285
O
Front wheel: Accuride 50344 22.5x8.25 steel
48
20
Steel Armor[TM] powder coat, hub pilot mount. heavy-duty 5 hand -hole
hub pilot mount.
5242285
O
Rear wheel: Accuride 50344 22.5x8.25 steel
192
80
Steel Armor[TM] powder coat, hub pilot mount. Heavy-duty 5 hand -hole
hub pilot mount. Code is priced per pair of wheels.
5853906
O
Powder coat white steel wheel. Use in conjunction
0
0
with front, dual front, rear, spare or lift axle wheel code(s). All wheels on
chassis must have same finish color.
5900008
O
Rear Wheel/Rim Quantity: 8
0
0
Frame & Equipment
6056400 O Frame Rails: 10-3/4 x 3-112 x 3/8in. Steel 285in. 397 271
to 336 in. Truck frame weight is 3.48 lb. -in. per pair of rails. Section
modulus is17.80, RBM is 2,132,000 in-lbs per rail. Frame rail availability
may be restricted based upon application, axle/suspension capacity, fifth
wheel setting, or component/dimensional specifications. The results of the
engineering review may result in a change to the requested frame rail. If a
change is required Kenworth Application Engineering will advise the
dealer of the appropriate material specification for a substitute rail.
6302460
O
Bumper: Tapered painted steel channel.
11
44
Requires a bumper setting code.
6319485
O
48.5 in. Bumper setting. Requires a bumper code.
0
0
6321005
O
Removable Front Tow Hooks: 2.
266
15
6390103
S
Front mudflaps.
0
0
6400636
O
Battery box cantilever aluminum BOC w/
100
8
fiberglass cover.
6409902
O
Battery box location: RH Side.
104
15
6410010
O
Frame access grabhandle(s) LH mounted. Placement
55
0
and quantity of grabhandles may vary due to FMCSR frame access
requirements.
6414002
O
Short aluminum frame access deck plate, 24 in.
121
10
unless only 12 in. fits.
6451090
O
T470,C5, T6, T8 non -polished DPF/SCR or CNG cover
105
30
diamond plate w/ step. For use w/ 2010 or later exhaust systems. For T8,
use extended length non -polished battery box on opposite rail to match
the length of under cab components.
6490440
O
Heavy-duty BOC crossmember assembly.
163
23
6543579
O
Fifth Wheel: Air, Holland FW35-7201X3L 24.5 in.
5,876
985
slide, 13.2 in, height. Kompensator mechanism, inboard mounted, 55K.
Accomodates a 2 in. SAE kingpin. Requires some style of trailer
connections.
Unpublished options may require reviewlapproval,
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
37663-931F-0533 Page 7 of 12
JL-] KEN'WORT
Data
Code
Description
$ List
Weight
6679975
O
Frame access package recommended. Dealer
0
0
contact declines.
6680120
0
FW rear/fixed setting and of bogie 12 in
0
0
indicates rearmost setting measured forward from centerline of tandem or
single rear axle
6721102
S
Rear mudflap arms: Betts B-25 standard -duty,
0
0
straight. Includes B1732 mounting brackets as standard.
672`2000
S
Rear mudflap shields: White plastic antisail wl
0
0
Kenworth logo.
6737120
0
Quarter Fenders: Black Polypropylene w/ painted
194
43
steel brackets, single post mounted, 21 in. white top flap with logo.
6745270
O
Top Flange of Rear Frame bent $ welded w/
105
17
crossmember. Non -towing end -of -frame configuration.
Fuel Tanks & Equip
7210100 S Fuel Tank: 100 US gallon 24.5in. aluminum under 0 0
replace. Class 8 fuel tanks w/ o locking caps include an anti -siphon device
on the filler neck.
7722011 O Small round DEF tank.11 gallons of 0 0
useable volume. The DEF tank will be located on the side you specified. If
you have specific configuration or body builder concerns, please utilize the
Custom Frame Layout option. Standard capacity is calculated by fuel
capacity of the vehicle and will accommodate two diesel fill -ups for every
DEF fill -up. For 1:1 DEF fuel fill ratio, add 7889204.
7839400 O Extended steps on fuel tank LH under for access; 65 2
2 steps/1 tank.
7880009 O Mechanical anti -roll channel for one tank. 40 6
7889203 O Standard DEF to fuel fill ratio: 2:1 or greater. 0 0
7889245 S Antl-siphon device swaged in place. 0 0
For any number of fuel tanks.
7889604 0 DEF tank location is on the LH. 0 0
7920100 O Location: 100 gal fuel tank LH under cab 0 0
Cab & Equipment
8024310 S Cab: Curved Glass Conventional. 0 0
Cab Includes aluminum & fiberglass fully hucked cab w/ all aluminum
bulkhead doors & continuous stainless steel piano -style door hinges.
Single electric horn standard. Incandescent exterior lights include
diagnosable bulb detection and warning. Trailer cable on tractors includes
integrity detection. Standard features include multiplex wiring for interior
lights, automated pre -trip inspection, short and open check diagnostics.
Warning alarm will sound when lights are left on.
8080137 O Cab door bearing blocks, top & bottom- 30 0
8090103 S Hood: Sloped Metton Hood Wl Grille & Shell Use 0 0
For T800B 1-Piece Requires Engine Mounted Air Cleaner, 1440 Square
In. Radiator & 2007+ Engines.
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
37663-931F-0533 Pane 8 of 12
111 KENWORTH
Data
Code
Description
$ List
Weight
8108010
S
Cab heater: W/integral defrosters & A/C 45,000
0
0
btu cab heater. No sleeper heater/AC. Includes 5 mode rotary control.
T660 include filter media.
8201013
S
Steering wheel: 18 in. 4-spoke.
0
0
822 7722
O
Gauge: Manifold Pressure Gauge.
29
0
The NavPlus HD unit includes a virtual manifold pressure gauge.
8225658 O
Gauge: Axle oil temperature, dual -drive axle.
237 0
(2 gauges) w/integral warning light.
8226667 O
Gauge: Oil Temperature Gauge Transmission.
38 0
The NavPlus HD unit includes a virtual transmission oil temperature
gauge.
8282004 S
KW Driver Information Center: Includes fuel
0 0
economy, RPM display, trip information, truck information, diagnostics,
gear display, alarm clock.
8282009 S
Instrument package: Includes speedometer,
0 0
tachometer, fuel gauge, engine coolant temperature gauge, engine oil
pressure, voltmeter. Class 8 also includes primary & secondary air
reservoir gauges & an air application gauge. DEF level gauge and warning
lamp are included with 2010+ engines. Engine hour meter and outside air
temperature readouts are standard. Primary read out will be MPH. Add
8240620 to switch primary scale to KPH in Canada.
8331100 S
Cab interior: Splendor. Includes smooth
0 0
upholstered side & back panels w/stitched accent lines, upholstered door
pads, full vinyl headliner, black dash panels & black rubber floormats.
8343304 S
Interior color: Slate Gray w/trim Dark Slate Gray
0 0
8410091 S
Driver seat: Kenworth Air cushion Plus HB cloth.
0 0
Standard features includes 7 in. fore and aft slide adjustment w/isolator, 6-
23 degree recline, air suspension with cover, dual armrests, and single
chamber air lumbar support. Seat cushion is 20 inches wide w/ 2-position
tilt and 2-position front cushion extension. Seat material has a horizontal
stitch pattern and is 2-tone in color. Seat back is carpeted and includes a
map pocket. Seat is manufactured by National. Includes inside visor and
retractable 3-point matching seat belts. Grey seat belts.
846 0091 O Rider seat: Kenworth Air cushion Plus HB cloth. 343 17
Standard features includes 7 in, fore and aft slide adjustment w/isolator, 6-
23 degree recline, air suspension with cover, dual armrests, and single
chamber air lumbar support. Seat cushion is 20 inches wide w/ 2-position
tilt and 2-position front cushion extension. Seat material has a horizontal
stitch pattern and is 2-tone in color. Seat back is carpeted. Seat is
manufactured by National. Includes inside visor and retractable 3-point
matching seat belts. Grey seat belts.
8490110 S Seat color: Dark Slate Gray.
8601420 O Kenworth Radio with AM/FM/WB
0
346 4
8700108 O Under dash center console: Includes one cupholder 25 0
& two 12V outlets. For use w/Autoshift, Ultrashift, & Allison Gen IV onjy.
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
37663-931F-0533 Paee 9 of 12
111 KENWORTHJ
Data
Code
Description Y
$ List
Weight
8700168
S
Non -self cancelling turn signal: W/column-mounted
0
0
headlight dimmer switch & intermittent wiper control.
8700186
S
Electric LH & RH door locks.
0
0
8700663
O
Kenworth TruckTech+
0
0
The Kenworth Remote Diagnostics system provides the Worlds Best
reporting of engine and aftertreatment fault codes, as well as enhanced
support for the truck owner through rapid communication of fault severity
and recommended actions. This option is Standard on all Kenworths with
an MX engine.
88QO271
S
Long grabhandle RH side of cab.
0
0
8600373
S
Long grabhandle LH side of cab.
0
0
8800400
S
Grabhandle LH inside door frame above dash.
0
0
8800401
S
Grabhandle RH inside door frame above dash.
0 0
8832115
O
DAYLITE DOOR: LH/RH INCL RH PEEPER WINDOW
0 0
8841411
S
Single air horn under cab.
0 0
8850235
O
Dual convex mirror 8.5 inch w/ offset mounting
below regular mirror, and non -heated.
42 8
8850300
S
Look -Down, Pass. Door, Stainless 8.5x4.4
0 0
8862101
O
Mirror: Dual Prutsman mirror 7 in. x 16 in.
-32 0
polished stainless steel, and non -heated.
8869005
S
Mirror brackets 8-1/2 ft load width.
0 0
8871445
O
Rear cab stationary window 17 in. x 36 in. dark
32 0
tint.
8879200 S Manual LH & electric -powered RH door window. 0 0
Switch located on door.
8890100 S One-piece windshield, wl curved glass. 0 0
8890134 S Exterior aerodynamic sunvisor wl integral marker 0 0
lights.
8890869 O Severe service reinforcements for aluminum cab
sill.
166 17
8890898 O Link Cabmate suspension. 658 22
8891000 O Quiet Cab Package: For Non-VIT Interiors. �181 77
Includes Firewall Insulation & Floor Covering w/ Sound Deadening
Materials and Cowl Blanket
Lights & Instruments
9010802 S Headlamps: Dual Rectangular, extended life 0 0
halogen
9026205 O Marker Lights: Five aerodynamic, LED mounted in 41 0
sunvisor.
9030010 S Turn Signal Lights: Mounted on fender 0 0
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date: Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
37663-931F-0533 Page 10 of 1
LUKENWORTH
Data
Code
Description
$ List
Weight
9030052
S
LED Stop,Turn,Taill With Two LED
0
0
Backup Lights and With An LED License Plate,
- 9052011
O
Dual Flush Floodlights: First set.
133
2
9059911
O
Floodlight Location: Located mid - first set.
0
0
9090027
O
Headlamps to turn on when wipers are active.
0
0
9090039
S
Marker Lights: Interrupter Switch.
0
0
Included in Turn Signal For All Models Except T3. The T3 Switch Is In The
Dash.
909Q126
O
Electric Backup Alarm: Meets SAE J994 & OSHA
161
4
requirements.
9090845
O
Circuit Breakers: Replacing fuses. Does not
43
0
apply to any 5-amp fuse box position. Breakers include stop/brake/turn,
tail lamp, high & low beams, marker/clearance lamps, horn, fuel heat,
gauges, air dryer, HVAC controls, panel lamps. Some circuits will remain
fuses.
Air Equipment
9101230 O
Air Dryer: Bendix AD -IS Extended Purge heated.
175
4
9108001 S
Moisture ejection valve w/ pull cable drain.
0
Q
9110071 O
Tractor kit: Center frame -mounted w/ hosetenna.
813
24
Includes composite gladhand/light plug holder. Kit includes dash mounted
trailer air supply valve, trailer hand control valve, and hoses/fittings for the
valves. Dash mounted parking brake valve and tractor protection valve are
standard. Air lines are detachable at one end only, light lines are
detachable at both ends. Conspicuity components are standard.
9121112 O
Coiled air & light lines replacing straight lines
86
0
. Included in tractor kit. 12ft working length.
9140020 S
Nylon air tubing in frame & cab, excluding hoses
0
0
subject to excessive heat or flexing.
9140225 O
Bendix trailer hand valve: spring loaded/self-
0
0
returning, replacing standard.
9140328 O
Trailer ABS electric supply through SAE J560
0
0
7-pin connector per TMC RP137).
9140701 O
Optional Hosetenna Bracket Location 1ft
15
0
BOC/sleeper. Hosetenna bracket will be located plus or minus six inches
from any non-standard location requested
Extended Warranty
9200021 S
Standard Warranty.
0
0
Miscellaneous
9409852 O GHG Secondary Manufacturer: Does Not Apply 0
Unpublished options may require reviewlapproval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Effective Date Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
37663-931F-0533 pave 11 of 17
K.ENWORTH
Data Code Description $ List Weight
9490213 O Warning triangle reflector kit: Floor mounted 49 12
parallel to back wall between seats. Kit consists of 3 triangles in plastic
carrying case. For day cab only.
9490404 O One 5 lb. dry chemical type fire extinguisher 133 11
mounted outboard of driver seat. Class ABC.
Paint
9700000
O
Paint color number.
0 0
N97020 A - L0006 WHITE
N97200 FRAME N0001 BLACK
N97700 BUMPER N0001 BLACK
9943014
O
Steel Bumper Painted Frame Color
0 0
9943050
O
Day Cab Standard Paint
0 0
9944820
0
1 - Color Paint - Day Cab _
0 0
Color will be White if no other color is specified.
9965510
S
Base coat/clear coat.
0 0
The Kenworth Color Selector contains additional instructions, as well as
information on Kenworth paint guidelines and surface finish applications.
Kenworth is standard with Dupont Imron Elite paint.
Total Adjusted Price (W/O Freight & Warranty & Surcharges) $195,095
Freight Charge $2,225
Options Not Subject to Discount $0
Surcharges Not subject to Discount $0
Total Weight 18914 lb
Prices and Specifications Subject to Change Without Notice.
Unpublished options may require reviewlapproval.
Dimensional and performance data for unpublished options may vary from that displayed In PROSPECTOR.
Printed:
Effective Date:
Prepared by:
10/4/2016 9:22:41 AM Complete Model Number: T800 Series Conventional.
Jul 1, 2016 Quote/DTPO/CO: Q55614090
Tony L Davis Version Number: 38.20
37663-931F-0533
Pane 12 of 12
13 KENWORTN
SUMMIT KENWORTH D141 CITY of LUBBOCK
4510 AVENUE A 1625 13th Street, RM 204
LUBBOCK, Texas United States 79404 Lubbock, Texas United States 79401
Phone: (806) 763-8213 Phone: (806) 762-6411
Fax: (806) 744-4117 Fax:
Email: tonydavis@robertstruck.com Contact Email:
Prepared for: Marta Alvarez
Horizontal Dimensions
Model:: T900 Series Corentional
Quote/DTPO/CO Number 055614090
12.9
Unpublished options may require review/approval.
Dimensional and performance data for unpublished options may vary from that displayed in PROSPECTOR.
Printed: 10/4/2016 9:22:56 AM Complete Model Number: T800 Series Conventional,
Effective Date: Jul 1, 2016 Quote/DTPO/CO: Q55614090
Prepared by: Tony L Davis Version Number: 38.20
08/08/2016
1 of
Department/Cost Center requesting vehicle/equipment:
Spec Content Reviewed R Approved by:
Department Head Authorizing Release of Spec:
Date:
CITY OF LUBBOCK, TEXAS
MINIMUM SPECIFICATIONS
TRUCK CREW CAB WITH 6 YARD DUMP BODY
SPECIFICATION NO.: 606 ST
It is the intent of this specification, referenced documents, requirements and conditions sections to describe minimum performance requirements. The vehicle or product
must meet or exceed the performance or construction described herein. The vendor shall be required to mark compliance or non-compliance to each item description in
the space provided. All equipment furnished as standard to the general public on the product by the manufacturer shall be included, even when not specifically identified
in this specification. Any deviations from the written specification with date as shown in the Invitation to Bid (ITB) shall be noted on the attached Exceptions to the
Specifications. In order to receive full consideration, ITB response quotation must follow this specification and the Imitation toBid's terms and conditions.
VENDOR NANIE: Roaj t-Q--rt5 I e.c K C,&a—, =-iZ PHONE: ( 06) %L ?j— SV L 13
MAKE: 1N"T1r*eN A-newAL MODEL: '�'�� S,3 A yX Z— YEAR: Z,011
NO. ITEM MINIMUM REQUIRENIENTS SELLER COMPLIANCE
YES NO
This specification is for a two -axle chassis equipped with a full width
four door crew cab with forward tilting hood and 6 yard dump body.
Equipment furnished for the specification shall comply with all
applicable requirements of the Environmental Protection Agency's
Exhaust Emission Standards (940 CFR 85) as issued under authority of
GENERAL — CAB
the Clean Air Act, as amended, (42 USC 1857, et seq.). It shall be the
CHASSIS
responsibility to the vendor to ensure that the equipment furnished meets
the most recent requirements of all applicable laws. In the event
equipment is furnished that is not in compliance with the law, it shall be
the responsibility of the vendor to make all necessary modifications to
the equipment required to achieve compliance with these laws.
A Certificate of Conformity on the engine is to be furnished with bid
submission.
1.
CAB TO AXLE
139 inches maximum cab to axle dimension, load platform 173 inches.
2
GROSS VEHICLE
WEIGHT RATING
Minimum 37,000 Pounds GVWR.
/
V
3
FRONT AXLE
14,000 Pounds with hub oilers.
CAPACITY
23,000 pound Axle with a gear ratio providing maximum start -on -grade
4.
REAR AXLE CAPACITY
capability. The grade ability shall be no less than 1.5% at 65 miles per
hour.
5.
SUSPENSION
Front to be OEM spring design and rear to be low ride air suspension
system arrangement meeting GVWR requirements.
6.
SHOCKS
OEM heavy duty front axle shocks.
7.
ENGINE
In -line 6-cylinder with a net horsepower of 275 with 860 ft lbs. Torque.
The engine must be compatible with the Allison 3000 RDS transmission.
Automatic Allison 3000 RDS series with five (5) forward speeds and
/
8.
TRANSMISSION
dash mounted electronic push button type shift selector transmission
controls.
S: Purchase/Bid Docs/ITB 16-13036-SS Various Utility Whicics
Tire and wheel combination shall be matched to the front and rear axle
9.
'TIREAWIEEL SIZE
capacities and be of the lo%v profile type. The tire and wheel shall in no
way lessen the rated axle capacities of 14,000 pounds front and 24.000
pounds rear.
10.
BRAKES
Full air brakes with S-Cam design and outboard mounted drums.
V
I I.
STEERING
OEM power assisted.
12.
FUEL TANKS
One 90 gallons minimum capacity fuel tank mounted on the driver side
of the cab below the frame.
13.
COOLING
OEM maximum cooling system available.
14.
GAUGES
pressure, AMP or voltmeter, coolant temperature, oil, tachometer,
and
and engine hoar meter.
15.
AIR CONDITIONING
OEM approved air conditioning. Configured for a crew cab truck.
16.
RADIO
OEM radio AMIFM with clock display and two speakers.
17.
FRAME
OEM approved frame for vehicle gross %%eight rating.
18.
BATTERIES
OEM standard matched with the alternator's capacity and truck
✓
requirements.
19.
ALTERNATOR
Minimum capacity of 150 AMPS
20.
SEATS
Full width bench seats front and rear vinyl covered in either charcoal or
grey color.
21.
GLAZING
OEM maximum tinting for all windows.
22.
INTERIOR LIGHTING
OEM cab interior lighting and overhead lighting
6'X 16" stainless steel heated west coast mirror design mounted on both
23•
MIRRORS
the driver and passenger's side of the vehicle and includes separate
mounted 6 inch convex mirrors.
24•
PAINT
The color shall be fleet white cab and wheels and black frame.
A tool box with lockable door length 36 inches x width 18 inches depth.
25•
TOOLBOX
18 inches to be mounted to the frame rail capable of being opened with
the bed down.
26.
ELECTRICAL
A 3,000 watt electric converter to be mounted in the truck under the rear
BU/LpE
CONVERTER
scat right side (Tripplite 3,000 watt or equal)
27•
OEM equipped to include an automatic air dryer and moisture drain
AIR COIPRESSOR
system.
The warranty coverage should provide the maximum mileage and time
28
available from the manufacturer. The coverage shall include in writing
/
V
WARRANTY
the components that are and are not included in the warranty with zero
deductible.
This specification describes a dump body, of (six) 6 cubic yard heaped
79.
GENERAL— Dl .NIP
capacity, with hinged tail gate, and hydraulic hoisting assembly, (Davis
BODY
Model TAS 13.8) furnished and installed on a two -axle chassis.
30.
DUMP BODY
6 cubic yard dump body, length 166 inches. width 92 inches.
DIMENSIONS
Manually operated two piece side hinged, opens from center, tailgate to
31.
TAILGATE
include heavy duty hinges, latch mechanism and lock open device to
secure the tailgate in the open position.
Front to be 30 inches above body floor height or must match chassis cab
32•
IIEAD/TAIL BOARD
height with a screened opening to match chassis back window. Tail to be
16 inches above floor height.
33.
HEIGHT ON SIDES
Metal sides to be 16 inches from floor.
34.
BODY CAPACITY
Bed to have a 6 cubic yard heap capacity.
S: Purchase/laid Docs/1T13 16-13036-SS Various Utility Vehicles
ad
>Y
The lift cylinder to be of the single -stage design, with holding feature
35•
CYLINDER
preventing the bed from falling in the event of a hydraulic line failure.
Scissor lift type hoist.
Construction on the sides to be 8 gauge high tensile wear resistant
36.
METAL GAUGE
materials. The floor material shall be not less than inch high tensile
and wear resistant.
The rear of truck shall be provided with a heavy duty buck plate. It must
have safety rings, a SAE/ICC six (6) way female trailer plug, wired to
DOI' guidelines and a pintle hood hitch that is rated for not less than the
37.
BUCKBOARD
chassis GV WR and a tongue weight of 20.000 pounds. Height of hook to
be centered at 24 (+/-2") inches. Mounted in the buckboard shall be 4
inch round red led stop/tail/turn lights and 4 inch clear back tip lights.
Mounted in flush shock absorbing rubber grommets of the closed back
style.
38.
MAIN FRAME
Two each, 5 inch beam or 6 inch channel longitudinal rails.
39.
CROSS MEMBERS
Shall be 4 inch channel gusseted to main frame rails
40.
TAILGATE BRACES
Sloping top surface at each end to connect to side boards
41.
CAB PROTECTION
Bed to have a % cab full width cab protector
Bed to have a full load electric tarp system that has a front to rear roll up
42.
TARP PROTECTION,
feature, capable of being deployed or retracted by operator while
standing on ground.
HYDRAULIC
Transmission mounted PTO and pump assemblies with air engagement
EQUIPMENT
and mechanical control of hoisting and lo%%ering of dump body easily
accessible to the operator.
44.
HYDRAULIC CONTROL
Controls to be hydraulic over air.
To be mounted on the left (driver side), outside frame rail without
HYDRAULIC
interfering with dump bed and allowing sufficient ground clearance.
4-5'
RESERVOIR
Reservoir capacities to be of sufficient size to fully raise the dump bed
plus 25% and equipped with a sight gauge screened filler, vent cap and
ball a shut IT -value.
46.
i11UD FLAPS
The dump body is to be equipped with front and rear splash guards
attached to the body so as not to hit the tires at highway speeds.
47.
UNDERCOATING
Dump body shall receive epoxy spray coating.
48.
PAINT
Body and attachments shall be media blasted, primed and painted with
an acrylic enamel or poly type paint black in color.
Dump body to have at the rear, recessed rubber mounted LED stop, turn
signals and marker lights. All wiring to be run in a loom and secured to
49.
LIGHTING
bed. 360 degree Whelen super LED beacons mounted to the front
corners of the dump body cab shield and controlled from the cab with a
light on lighted toggle.
The damp body and components of the hydraulic system controls and the
WARRANTY
installation shall be 100% warranted parts and labor for not less than two
�0'
COVERAGE
(2) years after acceptance by the City with zero deductible. Bidders shall
furnish a written detailed listing of inclusions and exclusions of warranty
with their bids.
5: Purchase/Did Docs/11'D 16-13036-S5 Various Utility Vehicles
OPTIONS
Extended warranty with full bumper to bumper coverage for five (5)
years and a minimum of 100,000 miles, %%ith zero deductible. Warrant}
may exclude normal service, such as oil changes, tires and brake
1
EXTENDED
lining, but shall be explained fully with response. When extended
NV ARRAi\l
warranty option purchased, the Allison transmission shall be furnished
with synthetic oil as required to support extended warranty. Bidders shall
furnish a written detailed listing of inclusions and exclusions of warranty-
$
with their bids.
Engine driven 125 CFM air compressor with all components to include
2.
AIR COMPRESSOR
tanks piping valves and hoses with a on and off switch in the cab. Hose
connectors and reel to be located on the curb side of the truck with a 50
$
foot hose.
GENERAL REQUIRE8IENTS AND INFORMATION
Bidder shall submit with each bid. current printed literature and specification sheets on the unit offered in the response to solicitation.
\ISO AND PAPERNVORK
Vehicle will not be accepted by the City of Lubbock without the MSO, all keys, and all paperwork
EXCEPTIONS TO THE SPECIFICATIONS
Exceptions to the specifications of any, items stated herein shall be fully described in writing by- the contractor in the space provided.
L ' c ut/ c .fib ,1-G R /G - c2 cRa3
- b tACNFi J !8:�eV
S: Purchase/Bid Does/1'rB 16-13036-SS Various Utility Vehicles
INTERNATIONAL°
Prepared For:
CITY OF LUBBOCK
marta alvarez
PO Box 2000
Lubbock, TX 79408-2000
(806)762 - 6411
Reference ID: N/A
October 03, 2016
Presented By:
ROBERTS TRUCK CENTER-LUB
David Todd
4510 AVENUE A
LUBBOCK TX 79404 -
(806)763-8213
Thank you for the opportunity to provide you with the following quotation on a new International truck. I am sure the following detailed
specification will meet your operational requirements, and I look forward to serving your business needs.
Model Profile
2017 4400 SBA 4X2 (MA035)
APPLICATION:
Construction Dump
MISSION:
Requested GVWR: 37000. Calc. GVWR: 37000
Calc. Start / Grade Ability: 22.53% / 2.35% @ 55 MPH
Calc. Geared Speed: 79.0 MPH
DIMENSION:
Wheelbase: 250.00. CA: 139.00, Axle to Frame: 39.00
ENGINE, DIESEL:
{Navistar N91 EPA 2010, SCR, 275 HP @ 2000 RPM, 860 lb-ft Torque @ 1200 RPM, 2200 RPM
Governed Speed, 275 Peak HP (MAX)
TRANSMISSION, AUTOMATIC:
{Allison 3000_RDS_P} 5th Generation Controls; Close Ratio, 5-Speed, With Overdrive; On/Off
Hwy; Includes Oil Level Sensor, With PTO Provision, Less Retarder, With 80,000-lb GVW & GCW
Max.
CLUTCH:
Omit Item (Clutch & Control)
AXLE, FRONT NON -DRIVING:
{Navistar Select} Wide Track, I -Beam Type, 14,000-lb Capacity
AXLE, REAR, SINGLE:
{Dana Spicer S23-170} Single Reduction, 23,000-lb Capacity, R Wheel Ends Gear Ratio: 4.30
CAB:
Conventional 6-Man Crew Cab
TIRE, FRONT:
(2) 315/80R22.5 Load Range L HSC1 (CONTINENTAL), 484 rev/mile, 68 MPH, All -Position
TIRE, REAR:
(4) 275/80R22.5 Load Range H HSR2 (CONTINENTAL), 518 rev/mile, 75 MPH, All -Position
SUSPENSION, REAR, AIR, SINGLE:
{Hendrickson HAS 230) 23,000-lb Capacity, 9.5" Ride Height, With Shock Absorbers
PAINT:
Cab schematic 100GA
Location 1: 9219, Winter White (Std)
Chassis schematic N/A
Proposal: 2587-01
INTERNATIONAL Vehicle Specifications October 03, 2016
2017 4400 SBA 4X2 (MA035)
Code
Description
MA03500
Base Chassis, Model 4400 SBA 4X2 with 250.00 Wheelbase, 139.00 CA, and 39.00 Axle to Frame.
1CAH
FRAME RAILS Heat Treated Alloy Steel (120,000 PSI Yield); 10.375" x 3.705" x 0.438" (263.5mm x 94.1mm
x 11.1mm); 456.0" (11582mm) Maximum OAL
1 LLD
BUMPER, FRONT Full Width, Aerodynamic, Steel; 0.142" Material Thickness
Includes
: BUMPER, FRONT Powder Coated Gray (Argent) Color
1WEJ
WHEELBASE RANGE 199" (505cm) Through and Including 254" (645cm)
2AUY
AXLE, FRONT NON -DRIVING {Navistar Select) Wide Track, I -Beam Type, 14,000-lb Capacity
3ADD
SUSPENSION, FRONT, SPRING Parabolic, Taper Leaf; 14,000-lb Capacity; With Shock Absorbers
Includes
: SPRING PINS Rubber Bushings, Maintenance -Free
Notes
: The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension,
Brake System; Brakes, Front Air Cam; Wheels; Tires.
4091
BRAKE SYSTEM, AIR Dual System for Straight Truck Applications
Includes
BRAKE LINES Color and Size Coded Nylon
DRAIN VALVE Twist -Type
GAUGE, AIR PRESSURE (2) Air 1 and Air 2 Gauges; Located in Instrument Cluster
PARKING BRAKE CONTROL Yellow Knob, Located on Instrument Panel
PARKING BRAKE VALVE For Truck
QUICK RELEASE VALVE On Rear Axle for Spring Brake Release: 1 for 4x2, 2 for 6x4
SLACK ADJUSTERS, FRONT Automatic
SLACK ADJUSTERS, REAR Automatic
SPRING BRAKE MODULATOR VALVE R-7 for 42, SR-7 with relay valve for 6x4
Notes
Front and Rear Dust Shields not Included
RearAxle is Limited to 19,000-LB GAWR with Code 04091 BRAKE SYSTEM, AIR and Code 04NDC BRAKES,
REAR, AIR CAM Regardless of Axle/Suspension Ordered
: Rear Axle is Limited to 20,000-LB GAWR with Code 04092 BRAKE SYSTEM, AIR and Code 04NCW
BRAKES, REAR, AIR CAM Regardless of Axle/Suspension Ordered
: Rear Axle is Limited to 23,000-lb GAWR with Code 04091 BRAKE SYSTEM, AIR and Standard Rear Air Cam
Brakes Regardless of Axle/Suspension Ordered
4AZA AIR BRAKE ABS {Bendix AntiLock Brake System} Full Vehicle Wheel Control System (4-Channel)
4EBD AIR DRYER {Meritor Wabco System Saver 12001 with Heater
Includes
: AIR DRYER LOCATION Inside Left Rail, Back of Cab
4EXP BRAKE CHAMBERS, FRONT AXLE (Bendix) 20 Sgln
4EXU BRAKE CHAMBERS, REAR AXLE {Bendix EverSure) 30/30 Spring Brake
4JCJ BRAKES, FRONT, AIR CAM S-Cam; 16.5" x 5.0"; Includes 20 Sq. In. Long Stroke Brake Chambers
Notes
: Front Axle with 14,000-lb GAWR is Limited to 13,200-lb GAWR when used in Conjunction with 15" BRAKES,
FRONT, AIR CAM.
: The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension;
Brake System; Brakes, Front Air Cam; Wheels; Tires.
4LAA SLACK ADJUSTERS, FRONT {Haldex) Automatic
Proposal: 2587-01
INTERNATIONAL° Vehicle Specifications October 03, 2016
2017 4400 SBA 4X2 (MA035)
Code
Description
4LGA
SLACK ADJUSTERS, REAR {Haldex) Automatic
4NDB
BRAKES, REAR, AIR CAM S-Cam; 16.5" x 7.0'; Includes 30/30 Sq.ln. Long Stroke Brake Chamber and Spring
Actuated Parking Brake
Notes
: The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension;
Brake System; Brakes, Front Air Cam; Wheels; Tires.
4SBC
AIR COMPRESSOR {Bendix Tu-Flo 550) 13.2 CFM Capacity
5AAA
STEERING COLUMN Stationary
5CAL
STEERING WHEEL 2-Spoke, 18" Dia., Black
513SM
STEERING GEAR {Sheppard HD941 Power
7BJY
EXHAUST SYSTEM Inline, Horizontal Aftertreatment Device, Frame Mounted Right Side, Includes Short
Horizontal Tail Pipe
7WCW
TAIL PIPE Horizontal, Exits Right Side, 90 Degree Turnout
8000
ELECTRICAL SYSTEM 12-Volt, Standard Equipment
Includes
BATTERY BOX Steel
DATA LINK CONNECTOR For Vehicle Programming and Diagnostics In Cab
FUSES, ELECTRICAL SAE Blade -Type
HAZARD SWITCH Push On/Push Off, Located on Top of Steering Column Cover
HEADLIGHT DIMMER SWITCH Integral with Turn Signal Lever
JUMP START STUD Located on Positive Terminal of Outermost Battery
PARKING LIGHT Integral with Front Turn Signal and Rear Tail Light
STARTER SWITCH Electric, Key Operated
STOP, TURN, TAIL & B/U LIGHTS Dual, Rear, Combination with Reflector
TURN SIGNAL SWITCH Self -Cancelling for Trucks, Manual Cancelling for Tractors, with Lane Change
Feature
: TURN SIGNALS, FRONT Includes Reflectors and Auxiliary Side Turn Signals, Solid State Flashers; Flush
Mounted
: WINDSHIELD WIPER SWITCH 2-Speed with Wash and Intermittent Feature (5 Pre -Set Delays), Integral with
Turn Signal Lever
WINDSHIELD WIPERS Single Motor, Electric, Cowl Mounted
WIRING, CHASSIS Color Coded and Continuously Numbered
8GXD ALTERNATOR {Leece-Neville AVI160P2013) Brush Type; 12 Volt 160 Amp. Capacity, Pad Mount, With
Remote Sense
8HAB BODY BUILDER WIRING Back of Standard Cab at Left Frame or Under Extended or Crew Cab at Left Frame;
Includes Sealed Connectors for Tail/Amber Turn/Marker/ Backup/Accessory Power/Ground and Sealed
Connector for Stop/Turn
SMEZ BATTERY SYSTEM (International) Maintenance -Free, (2) 12-Volt 1850CCA Total
8RKB RADIO {Panasonic CQ120) AM/FM, Includes Multiple Speakers, Includes Auxiliary Input
Includes
SPEAKERS IN CAB (2) Dual -Cone with Deluxe Interior
SPEAKERS IN CAB (4) Coaxial with Premium Interior
8THB BACK-UP ALARM Electric, 102 dBA
8VAY HORN, ELECTRIC Disc Style
8WTK STARTING MOTOR {Delco Remy 38MT Type 300) 12 Volt; less Thermal Over -Crank Protection
8WTR COURTESY LIGHT (4) Mounted In Front & Rear Map Pocket Left and Right Side
3 Proposal: 2587-01
INTERNATIONAL° Vehicle Specifications October 03, 2016
2017 4400 SBA 4X2 (MA035)
Code
Description
Notes
: Feature included with CAB INTERIOR TRIM, Premium
8WWJ
INDICATOR, LOW COOLANT LEVEL With Audible Alarm
8WZK
HEADLIGHTS Halogen; Composite Aero Design for Two Light System
SHAD
GRILLE Chrome
9WAY
FRONT END Tilting, Fiberglass, With Three Piece Construction
10060
PAINT SCHEMATIC, PT-1 Single Color, Design 100
Includes
PAINT SCHEMATIC ID LETTERS "GA"
10761
PAINT TYPE Base Coat/Clear Coat, 1-2 Tone
10UAD
VEHICLE REGISTRATION IDENTITY ID for 49 States, Excluding California
11001
CLUTCH Omit Item (Clutch & Control)
12703
ANTI -FREEZE Red, Extended Life Coolant; To -40 Degrees F/ -40 Degrees C, Freeze Protection
12NWK
ENGINE, DIESEL {Navistar N91 EPA 2010, SCR, 275 HP @ 2000 RPM, 860 lb-ft Torque @ 1200 RPM, 2200
RPM Governed Speed, 275 Peak HP (MAX)
Includes
AIR COMPRESSOR AIR SUPPLY LINE Naturally -Aspirated (Air Brake Chassis Only)
COLD STARTING EQUIPMENT Intake Manifold Electric Grid Heater with Engine ECM Control
CRUISE CONTROL Electronic; Controls Integral to Steering Wheel
ENGINE OIL DRAIN PLUG Magnetic
ENGINE SHUTDOWN Electric, Key Operated
FUEL FILTER Included with Fuel/Water Separator
FUEL/WATER SEPARATOR Fuel/Water Separator and Fuel Filter in a Single Assembly; With Water -in -Fuel
Sensor; Engine Mounted
GOVERNOR Electronic
OIL FILTER, ENGINE Spin -On Type
WET TYPE CYLINDER SLEEVES
12THT
FAN DRIVE {Horton Drivemaster) Direct Drive Type, Two Speed With Residual Torque Device for Disengaged
Fan Speed
Includes
: FAN Nylon
Notes
: Recommend Code 12THT when using front mount obstructions (winches, cones, reels, etc.) that restrict air
flow through the radiator.
12UAW
RADIATOR Aluminum; 2-Row, Cross Flow, Over Under System, 1045 Sqln Louvered, With 373 Sqln CAC,
With In Tank Oil Cooler
12UPA
FEDERAL EMISSIONS {Navistar N9 & N101 EPA, OBD and GHG Certified for Calendar Year 2016
12VBR
AIR CLEANER With Service Protection Element
Includes
: GAUGE, AIR CLEANER RESTRICTION Air Cleaner Mounted
12VXT
THROTTLE, HAND CONTROL Engine Speed Control; Electronic, Stationary, Variable Speed; Mounted on
Steering Wheel
12VZA
ENGINE CONTROL, REMOTE MOUNTED Provision for; Includes Wiring for Body Builder Installation of PTO
Controls; With Ignition Switch Control for MaxxForce and Navistar post 2007 Emissions Electronic Engines
4 Proposal: 2587-01
INTERNATIONAL°
Code
12WZE
13AVJ
13WBL
13WLP
13WUC
13WYU
13XAN
14AHB
14TAX
15DYT
15LKG
15LMA
15WDG
16196
Vehicle Specifications
2017 4400 SBA 4X2 (MA035)
October 03, 2016
Description
EMISSION COMPLIANCE Federal, Does Not Comply With California Clean Air Idle Regulations
TRANSMISSION, AUTOMATIC (Allison 3000_RDS_P) 5th Generation Controls; Close Ratio, 5-Speed, With
Overdrive; On/Off Hwy; Includes Oil Level Sensor, With PTO Provision, Less Retarder, With 80,000-lb GVW
& GCW Max.
TRANSMISSION SHIFT CONTROL {Allison) Push -Button Type; for Allison 3000 & 4000 Series Transmission
TRANSMISSION OIL Synthetic; 29 thru 42 Pints
ALLISON SPARE INPUT/OUTPUT for Rugged Duty Series (RDS); General Purpose Trucks, Construction
SHIFT CONTROL PARAMETERS Allison 3000 or 4000 Series Transmissions, 5th Generation Controls,
Performance Programming
PTO LOCATION No PTO
AXLE, REAR, SINGLE (Dana Spicer S23-170) Single Reduction, 23,000-lb Capacity, R Wheel Ends. Gear
Ratio: 4.30
Includes
: REAR AXLE DRAIN PLUG (1) Magnetic, For Single Rear Axle
Notes
: The following features should be considered when calculating Rear GAWR: Rear Axles; Rear Suspension;
Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires.
: When Specifying Axle Ratio, Check Performance Guidelines and TCAPE for Startability and Performance
SUSPENSION, REAR, AIR, SINGLE {Hendrickson HAS 230) 23,000-lb Capacity, 9.5" Ride Height, With Shock
Absorbers
Notes
: The following features should be considered when calculating Rear GAWR: Rear Axles; Rear Suspension;
Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires.
FUEL TANK (2) Top Draw; D-Style, Non -Polished Aluminum, 16" Tank Depth, (1) 40 U.S. Gal. 151 L Left Side,
(1) 50 U.S. Gal. 189 L Right Side, Total Capacity 90 U.S. Gal. 340 L; Mounted Under Cab Left and Right Side
FUEL/WATER SEPARATOR with Thermostatic Fuel Temperature Controlled Electric Heater, and Filter
Restriction/Change Indicator, Includes Standard Equipment Water -in -Fuel Sensor
LOCATION FUEL/WATER SEPARATOR Mounted Outside Left Rail 15" Back of Cab
DEF TANK 7 U.S. Gal. 26.5L Capacity, Frame Mounted Outside Left Rail, Under Cab
CAB Conventional 6-Man Crew Cab
Includes
ARM REST (2) Molded Plastic; One Each Door
CLEARANCE/MARKER LIGHTS (5) Flush Mounted
COAT HOOK, CAB Located on Rear Wall, Centered Above Rear Window
CUP HOLDERS Two Cup Holders, Located in Lower Center of Instrument Panel
DOME LIGHT, CAB Rectangular, Door Activated and Push On -Off at Light Lens, Timed Theater Dimming,
Integral to Console, Center Mounted
GLASS, ALL WINDOWS Tinted
GRAB HANDLE, CAB INTERIOR (1) "A" Pillar Mounted, Passenger Side
GRAB HANDLE, CAB INTERIOR (2) Front of "B" Pillar Mounted, One Each Side
GRAB HANDLE, CAB INTERIOR (4) Two Each Side, Rear Door Mounted at Hinge Side and "C" Pillar
Mounted
INTERIOR SHEET METAL Upper Door (Above Window Ledge) Painted Exterior Color
STEP (8) Two Steps Per Door
Notes
: 43.9" CA Loss
5
Proposal: 2587-01
INTERNATIONAL° Vehicle Specifications October 03, 2016
2017 4400 SBA 4X2 (MA035)
Code
Description
16400
SEAT, PASSENGER Omit Item
16HBA
GAUGE CLUSTER English With English Electronic Speedometer
Includes
: GAUGE CLUSTER (5) Engine Oil Pressure (Electronic), Water Temperature (Electronic), Fuel (Electronic),
Tachometer (Electronic), Voltmeter
ODOMETER DISPLAY, Miles, Trip Miles, Engine Hours, Trip Hours, Fault Code Readout
WARNING SYSTEM Low Fuel, Low Oil Pressure, High Engine Coolant Temp, and Low Battery Voltage
(Visual and Audible)
16HGH
GAUGE, OIL TEMP, AUTO TRANS, for Allison Transmission
16HKT
IP CLUSTER DISPLAY On Board Diagnostics Display of Fault Codes in Gauge Cluster
16HLJ
GAUGE, DEF FLUID LEVEL
16JXG
SEAT, FRONT BENCH {National) Full Width; Vinyl, With Fixed Mid Back
16SED
GRAB HANDLE (2) Black, Aluminum; for Cab Entry Mounted Left and Right each Side at "B" Pillar
16SMT
SEAT, REAR {National) BENCH; Full Width; Vinyl, With Fixed Back and Two Integral Outboard Headrests
16SNB
MIRRORS (2) {Lang Mekra) Rectangular, Thermostatically Controlled Heated Heads, Black Heads, Brackets
and Arms, Breakaway Type, 7.55" x 14.1" Integral Convex Both Sides, 102" Inside Spacing
16VAH
CUP HOLDERS Omit, In Instrument Panel
16WCT
AIR CONDITIONER {Blend -Air) With Integral Heater & Defroster
Includes
HEATER HOSES Premium
HOSE CLAMPS, HEATER HOSE Mubea Constant Tension Clamps
REFRIGERANT Hydrofluorocarbon HFC-134A
16WJS
INSTRUMENT PANEL Center Section, Flat Panel
16WLE
STORAGE POCKET, DOOR Molded Plastic, Full Width; Mounted on Passenger Door
16WSG
CAB INTERIOR TRIM Deluxe; for Crew Cab
Includes
"A" PILLAR COVER Molded Plastic
CAB INTERIOR TRIM PANELS Cloth Covered Molded Plastic, Full Height; All Exposed Interior Sheet Metal
is Covered Except for the Following: with a Two -Man Passenger Seat or with a Full Bench Seat the Back Panel
is Completely Void of Covering
CONSOLE, OVERHEAD Molded Plastic; With Dual Storage Pockets with Retainer Nets and CB Radio Pocket
DOOR TRIM PANELS Molded Plastic; Driver and Passenger Doors
FLOOR COVERING Rubber, Black
HEADLINER Soft Padded Cloth
INSTRUMENT PANEL TRIM Molded Plastic with Black Center Section
STORAGE POCKET, DOOR (1) Molded Plastic, Full -Length; Driver Door
SUN VISOR (2) Padded Vinyl with Driver Side Toll Ticket Strap, Integral to Console
16WSK CAB REAR SUSPENSION Air Bag Type
16XYV ACCESS, CAB Driver & Passenger Sides, Two Bright Aluminum Steps Per Door, for Use with Crew Cabs
27DPN WHEELS, FRONT (Accuride 29039) DISC; 22.5x9.00 Rims, Powder Coat Steel, 5-Hand Hole, 10-Stud,
285.75mm BC, Hub -Piloted, Flanged Nut, with Steel Hubs, Non -Standard Offset, with .5" Thick Disc
28DTU WHEELS, REAR {Accuride 29001) DUAL DISC; 22.5x7.50 Rims, Powder Coat Steel, 5-Hand Hole, 10-Stud,
285.75mm BC, Hub -Piloted, Flanged Nut, with Steel Hubs
29580 WHEEL SEALS, FRONT {International) Oil -Lubricated Wheel Bearings
Proposal: 2587-01
INTERNATIONAL°
Code
7792535415
7792545419
40116
Vehicle Specifications
2017 4400 SBA 4X2 (MA035)
October 03, 2016
Description
(4) TIRE, REAR 275/80R22.5 Load Range H HSR2 (CONTINENTAL), 518 rev/mile, 75 MPH, All -Position
(2) TIRE, FRONT 315/80R22.5 Load Range L HSC1 (CONTINENTAL), 484 rev/mile, 68 MPH, All -Position
Services Section:
WARRANTY Standard for Durastar 1000/4000 Series, Effective with Vehicles Built January 2, 2015 or Later,
CTS-2475P
Proposal: 2587-01
INTERNATIONAL° Financial Summary October 03, 2016
2017 4400 SBA 4X2 (MA035)
Description
Factory List Prices:
Product Items
Service Items
Total Factory List Price Including Options:
Freight
Total Freight:
Total Factory List Price Including Freight:
Less Customer Allowance:
Total Vehicle Price:
Total Sale Price:
Total Per Vehicle Sales Price:
Net Sales Price:
(US DOLLAR)
$124,178.00
$0.00
$2,200.00
Price
$124,178.00
$2,200.00
$126, 378.00
($49,771.82)
$76,606.18
$76,606.18
$76,606.18
$76,606.18
Please feel free to contact me regarding these specifications should your interests or needs change. I am confident you will be
pleased with the quality and service of an International vehicle.
Approved by Seller:
Official Title and Date
Authorized Signature
This proposal is not binding upon the sellerwithout
Seller's Authorized Signature
Accepted by Purchaser:
Firm or Business Name
Authorized Signature and Date
Official Title and Date
The TOPS FET calculation is an estimate for reference purposes only. The seller or retailer is responsible for calculating
and reportingipaying appropriate FET to the IRS.
8 Proposal: 2587-01
08/08/2016
1 of4
Deparmlenl/Cost Center requesting vchiclehxluipment:
Slice Content Reviewed 8c Approved by:
Department I [cad Authorizing Release of Slrec:
Dale:
CITY OF LUBBOCK, TEXAS
MINIMUM SPECIFICATIONS
TRUCK CREW CAB WITII 6 YARD DUMP BODY
SPECIFICATION NO.: 606 ST
It is die intent ofthis specification, rcibrcnced documents, requirements and conditions sections to describe minimum performance requirements. The vehicle or product
must meet or exceed the performance or construction described herein. lire vendor shall be required to mark compliance or non-compliance to each item description in
the space provided. All equipment furnished as standard to the general public on the product by the manufrcturershall be included, even when not specifically identified
in this specification. Any deviations from the written specification with date as shown in (Ire Invitation to Bid (ITB) shall be noted on die attached Exceptions to the
Srec:ifications. In order to receive full consideration, ITB response quotation must follow this slecificntion and the Invitation toBid's terms and conditions.
VENDOR NAME: PIIONE
MAKE: MODEL: YEAR:
NO. ITEM MINIMUM REQUIREMENTS SELLER COMPLIANCE
YES NO
This specification is for a two -axle chassis equipped with a full width
four door crew cab with forward tilting hood and 6 yard dump body.
Equipment furnished for the specification shall comply with all
applicable requirements of the Environmental Protection Agency's
Exhaust Emission Standards (940 CFR 85) as issued under authority of
GENERAL —CAB
the Clean Air Act, as amended, (42 USC 1857, et seq,). It shall be the
CHASSIS
responsibility to the vendor to ensure that the equipment furnished meets
the most recent requirements of all applicable laws. In the event
equipment is furnished that is not in compliance with the law, it shall be
the responsibility of the vendor to make all necessary modifications to
the equipment required to achieve compliance with these laws.
A Certificate of Conformity on the engine is to be furnished with bid
submission.
I.
CAB TO AXLE
139 inches maximum cab to axle dimension, load platform 173 inches.
7.
GROSS VEHICLE
WEIGHT RATING
Minimum 37,000 Pounds GVWR.
3
FRONT AXLE
14,000 Pounds with hub oilers.
CAPACITY
23,000 pound Axle with a gear ratio providing maximum start -on -grade
4.
REAR AXLE CAPACITY
capability. The grade ability shall be no less than 1.5% at 65 miles per
hour.
5.
SUSPENSION
Front to be OEM spring design and rear to be low ride air suspension
system arrangement meeting GVWR requirements.
6.
SHOCKS
OEM heavy duty front axle shocks.
7.
ENGINE
In -line 6-cylinder with a net horsepower of 275 with 860 ft lbs. Torque.
The engine must be compatible with the Allison 3000 RDS transmission.
Automatic Allison 3000 RDS series with five (5) forward speeds and
8.
TRANSMISSION
dash mounted electronic push button type shift selector transmission
controls.
V.e-,no,t : ACk- Up nA-1-f r-,ve Ptivnc
Malee 1 PUPC_AuIse A40pj/' 606 Cw,�a�, Veal,' 20A
Ple,1�46- fee Al eT E s p vt P W i l,c S 14 ff
/� 7"L'ra L 13 61C fI rr B
S: Purchase/Bid Rocs/ITB 16-13036-SS Various Utility Vehicles d: N sett 7—D lid — //J cd5 7- d Z 13 e,%
Tire and wheel combination shall be matched to the front and rear axle
9.
TIRE/WHEEL SIZE
capacities and be of the low profile type. The tire and wheel shall in no
way lessen the rated axle capacities of 14,000 pounds front and 24,000
pounds rear.
10.
BRAKES
Full air brakes with S-Cam design and outboard mounted drums.
If.
STEERING
OEM power assisted.
12.
FUEL TANKS
One 90 gallons minimum capacity fuel tank mounted on the driver side
of tine cab below the frame.
13.
COOLING
OEM maximum cooling system available.
14.
GAUGES
Oil pressure, AMP or voltmeter, coolant temperature, oil, tachometer,
and engine hour meter.
15.
AIR CONDITIONING
OEM approved air conditioning. Configured for a crew cab truck.
16.
RADIO
OEM radio AM/FM with clock display and two speakers.
17.
FRAME
OEM approved frame for vehicle gross weight rating.
18.
BATTERIES
OEM standard matched with the alternator's capacity and truck
requirements.
19.
ALTERNATOR
Minimum capacity of 150 AMPS
20.
SEATS
Full width bench seats front and rear vinyl covered in either charcoal or
grey color.
21.
GLAZING
OEM maximum tinting for all windows.
22.
INTERIOR LIGHTING
OEM cab interior lighting and overhead lighting
6'X16" stainless steel heated west coast mirror design mounted on both
23.
MIRRORS
the driver and passenger's side of the vehicle and includes separate
mounted 6 inch convex mirrors.
24•
The color shall be fleet white cab and wheels and black frame.
PAINT
A tool box with lockable door length 36 inches x width 18 inches depth.
25.
TOOLBOX
18 inches to be mounted to the frame rail capable of being opened with
/
V/
the bed down.
26.
ELECTRICAL
A 3,000 watt electric converter to be mounted in the truck under the rear
/
CONVERTER
seat right side (Tripplite 3,000 watt or equal)
V
27.
OEM equipped to include an automatic air dryer and moisture drain
AIR COMPRESSOR
system.
The warranty coverage should provide the maximum mileage and time
�8
available from the manufacturer. The coverage shall include in writing
WARRANTY
the components that are and are not included in the warranty with zero
deductible.
This specification describes a dump body, of (six) 6 cubic yard heaped
79.
GENERAL— DUMP
capacity, with hinged tail gate, and hydraulic hoisting assembly, (Davis
BODY
Model TAS 13.8) furnished and installed on a two -axle chassis.
1
30.
DUMP BODY
6 cubic yard dump body, length 166 inches, width 92 inches.
/
V
DIMENSIONS
Manually operated two piece side (tinged, opens from center, tailgate to
31.
TAILGATE
include heavy duty hinges, latch mechanism and lock open device to
secure the tailgate in the open position.
Front to be 30 inches above body floor height or must match chassis cab
37•
HEAD/TAIL BOARD
height with a screened opening to match chassis back window. Tail to be
16 inches above floor height.
33.
HEIGHT ON SIDES
Metal sides to be 16 inches from floor.
r4.
BODY CAPACITY
Bed to have a 6 cubic yard heap capacity.
S: Purchasc/13id Docs/1'1'13 16-13036-SS Various Utility Vehicles
The lift cylinder to be of the single -stage design, with holding feature
35.
CYLINDER
preventing the bed from falling in the event of a hydraulic line failure.
/
Scissor lift type hoist.
V
Construction on the sides to be 8 gauge high tensile wear resistant
36.
METAL GAUGE
materials. The Floor material shall be not less than % inch high tensile
and wear resistant.
The rear of truck shall be provided with a heavy duty buck plate. It must
have safety rings, a SAE/ICC six (6) way female trailer plug, wired to
DOT guidelines and a pintle hood hitch that is rated for not less than the
37.
BUCKBOARD
chassis GV WR and a tongue weight of 20,000 pounds. Height of hook to
be centered at 24 (+/-2") inches. Mounted in the buckboard shall be 4
inch round red led stop/tail/tum lights and 4 inch clear back up lights.
Mounted in flush shock absorbing rubber grommets of the closed back
style.
38.
MAIN FRAME
Two each, 5 inch beam or 6 inch channel longitudinal rails.
39.
CROSS MEMBERS
Shall be 4 inch channel gusseted to main frame rails
40.
TAILGATE BRACES
Sloping top surface at cacti end to connect to side boards
V
41.
CAB PROTECTION
Bed to have a''/2 cab full width cab protector
V
Bed to have a full load electric tarp system that has a front to rear roll up
42.
TARP PROTECTION
feature, capable of being deployed or retracted by operator while
standing on ground.
HYDRAULIC
Transmission mounted PTO and pump assemblies with air engagement
43.
EQUIPMENT
and mechanical control of hoisting and lowering of dump body easily
accessible to the operator.
44,
HYDRAULIC CONTROL
Controls to be hydraulic over air.
To be mounted on the left (driver side), outside frame rail without
HYDRAULIC
interfering with dump bed and allowing sufficient ground clearance.
45.
RESERVOIR
Reservoir capacities to be of sufficient size to fully raise the dump bed
plus 25% and equipped with a sight gauge screened filler, vent cap and
ball type shut off value.
46.
MUD FLAPS
The dump body is to be equipped with front and rear splash guards
attached to the body so as not to hit the tires at highway speeds.
47.
UNDERCOATING
Dump body shall receive epoxy spray coating.
V Q-)
48.
PAINT
Body and attachments shall be media blasted, primed and painted with
an acrylic enamel or poly type paint black in color.
�r�)
11
Dump body to have at the rear, recessed rubber mounted LED stop, turn
signals and marker lights. All wiring to be run in a loom and secured to
49.
LIGHTING
bed. 360 degree Whelen super LED beacons mounted to the front
comers of the dump body cab shield and controlled from the cab with a
V
li [it on li ted toggle.
The dump body and components of the hydraulic system controls and the
WARRANTY
installation sliall be 100% warranted parts and labor for not less than two
CH)
50.
COVERAGE
(2) years after acceptance by the City with zero deductible. Bidders shall
N
furnish a written detailed listing of inclusions and exclusions of warranty
with their bids.
S: Purchasdl3id Docs/ITB 16-13036-SS Various Utility Vehicles
OPTIONS
Extended warranty with full bumper to bumper coverage for five (5)
years and a minimum of 100,000 miles, with zero deductible. Warranty
may exclude normal service, such as oil changes, tires and brake
l
EXTENDED
lining, but shall be explained fully with response. When extended
WARRANTY
warranty option purchased, tite Allison transmission shall be furnished
with synthetic oil as required to support extended warranty. Bidders shall
furnish a written detailed listine of inclusions and exclusions of warranty
S
with their bids.
Engine driven 125 CFM air compressor with all components to include
2.
AIR COMPRESSOR
tanks piping valves and hoses with a on and off switch in the cab. Hose
connectors and reel to be located on the curb side of the truck with a 50
S 3 u J-b
I
foot hose. %3oss So&o-tti4BY 3-GR-hI
'
/2.-P.P-Hn fO /I0 .(7- i A,."— leer, rD s.l 'c 34l"
GENERAL REQUIREMENTS AND INFORMATION
Bidder shall submit with each bid, current printed literature and specification sheets on the unit offered in the response to solicitation.
MSO AND PAPERWORK
Vehicle will not be accepted by the City of Lubbock without the MSO, all keys, and all paperwork
EXCEPTIONS TO THE SPECIFICATIONS
Exceptions to the specifications of any items stated herein shall be fully described in writing by the contractor in the space provided.
IYaTt ,3 c 'PIf 3/z./;-,,n r,,P,tl- Vp PrT4. 1-(E,vw 7+x keg .4
3 taco w c 13 g (je-6AJ e t# f ax n nsi 2� w rW sEMr Less ,3G Vb
/ Iv/i 0A,
�I • • ('k U /H i,,, I /I A-U- / 01 %LIB 1 th pp -'I- 5
/} S / 0 lu A-S All 11'I , fv T j! 7v ' iS e A 2 114 b` la n, P R Gt
Wd s a , / UN ' A 5e2v-7(-'ca
13 o tki a IZen Ss t)(Q. Y 69 g WL, v,?a2 A lc t-9;ZA1q-tTICS
R aO
S: Pwchase/13id Docs/I1'13 I6-13036-SS Various Utility Vehicles
o"VA I-
N$RDTARY
SCREW
3
8080 / 80100 UHRI PTO Orive
Underdeck Rotary Screw Air Compressor
IAII
The BOSS° UHBI PTO design allows you the option to choose any cfm
output up to 85cfm utilizing the 80100 or up to 185cfm with the 8060.
By simply adjusting the engine speed control, the compressor will produce
the cfm continuously. Once the UHBI PTO is engaged, engine torque and
horsepower are transmitted to the air compressor via a properly designed
hydraulic system. The speed control for the compressor modulates
according to air demand, which offers fuel savings, as well as, reduces
wear and tear on the vehicle's engine. When the job is complete, simply
disengage the UHBI PTO and continue to the next job site.
Because the UHBI PTO air compressor components become an integral
part of the vehicle and are mounted below the body, it offers many
advantages you cannot get when using conventional air compressors.
• Frees up the tow hitch
• Takes up no body space
• Fewer parts - Compared to its towable or cross -mount counterparts
• Light weight - Less than 300lbs for the 80100and 440lbs for the 8060
• Only one engine to maintain - Simplifies preventive maintenance
• Cost savings - No need for additional licensing fees or insurance
SPECIFICATIONS
Delivery ® 110psig- 35cfm 45cfm I 60cfm 85dm 100cfm
Input speed RPM to 1110 1395 1830 2500 3000
compressor (TBG 3.69:1)
Standard Motor "A" GPM I 8.1 1 10A I 13.3 1 18.2 J XX.X
® 2400 PSI"
Standard Motor "B" GPM I 10.6 + 13.3 1 17,4 ' 23.8 1 27.6
0 1900 PSI" i
Delivery ® 110psig" I 100cfm I 125cfm I 160cfm I 185cfm
Input speed RPM to 1200 1450 11175 2160
compressor (3.05:1)
Input GPM ® 2200 PSI 24.4 29.4 38.0 43.8
for 8060-UH81"
"Hydraulic calculations include 85% mechanical elticrency and 96%volumetric efficiency.
Note: input speeds may vary depending on chassis application. 125psig and 150p91g
avalable. Consult factory.
Compressor air -end
10" W x 16" H x 18" L
Receiver sump
12" da x 22" L
Spin -on coalescer
5 W' dia x 12" H
12vdc remote
27" W x 16 YV H x 19 34 L
cooler assembly"
Gauge package
3%" W x 4 A" H x 3" L
Weight (dry)
300lbs.
' 24vdc is available.
111138VIS&
10"W x 8" H x 15" L
12'diax22'L
544"dlax12"H
2T'Wx16W'Hx1914"L
31;"Wx4r/4"Hx3"L
440lbs.
BDSS INDUSTRIES, INC.
1761 Genesis Drive LaPorte, IN 46350
Voice: (219) 324-7776 • (800) 635-6587 • Fax: (219) 324-7470
Electronic: www.bossair.com • email: sales@bossair.com
The B-CAN Compressor Control System
DURABLE. CAPABLE. RELIABLE.
I he B-CAN is a remote compressor control system featuring a 3.5 inch
fully sunlight viewable screen that is menu based for service and
diagnostic information.
• USB interface allows quick and easy software updates
• Internal buzzer to alert operators of warnings and shutdowns
• Plug -and -go solution for displaying J1939 engine and transmission data
• Service interval alarms
• Robust polycarbonate case with IP67 rating
• Fully -sealed DeufscM electrical connectors
Optional PTO and Hydraulic
Pump Shown
B-CAN (Mounting Location May Vary)
\x !< Air/Oil Manifold
N/
Rotary Screw
Compressor
Some optional items r
()it Separation Tank
not shown: Oil Reservoir,
Filler, Pump, Cooler and
Pressure Reliel.
12vdc Compressor Cooler \
(Mounting Location May Vary)
DISTRIBIITED liv:
Specifications subject to change without notice.
02014 Boss Industries, Inc. Printed In U.S,A. SOMS0100 UHBI PTO. 2500 081914. 81
111138330 engineeredAIRsystems
MINIMUM SPECIFICATIONS FOR UNDERDECK HYDRAULIC AIR
COMPRESSOR
Quantity of one (1) Boss Model 8060-UHBI B-CAN hydraulic drive underdeck air
compressor (s) to include the following as standard equipment:
• Boss oil flooded, rotary screw air -end designed to produce up to 185 CFM @ 110
PSIG continuously.
• Delivery Cad, 110 psig 60 cfm 85 cfin 100 cfin 125 cfm 160 cfin 185 cfin
Flow @ 2200 psig 14.9gpm 20.7gpm 24.6gptn 29.5gpm 38gpm 43.5gpm
*Calculations performed @ 85% efficiency mechanical and 96% efficiency volumetric.
• Side -by -side gear set incorporated into air -end to achieve conservative engine
speeds and greatest ground clearance. Air -end to incorporate a bolt -on inlet
control valve for ease of replacement and/or maintenance of the air -end or control
valve. Inlet control shall not be incorporated in the cast iron housing of the air
compressor as a single piece.
• Two year, unlimited hour, warranty on the air -end is standard. A lifetime
warranty is available when a maintenance schedule is adhered to as directed by
the manufacturer.
• Remote mount horizontal oil receiver tank with filler port, lubricant level sight
glass. Exterior shell of vessel to be welded, so as to be one piece. No bolt -on end
plates acceptable. Tank must be ASME/CRN approved.
• Air/oil manifold to include:
1. All electric senders, transducer, minimum pressure orifice, regulator, and
compressor blowdown valve.
2. Self-contained separator element capable of 195 CFM @ 290 PSI with
easy spin -on housing.
3. Replaceable spin -on compressor lubricant filter with safety bypass and 25-
micron rating.
• Engine speed and air inlet controls for automatic modulation of engine speed to
snatch air demand. Engine speed control to interface with the chassis J1939
protocol and requires no OEM engine/transtnission programming or pinning.
(consult factory for approved applications)
Revised: 5/2014
Supersedes:
Pagel of 3
1761 Genesis Dr. • LaPorte IN 46350.219/324-7776 Phone • 219/324-7470 Fax
I Illness@ engineered I R systems
• Remote mount, self contained, aerodynamically designed cooling package.
Venturi housing to be single piece formed ABS plastic that utilizes 100% of the
radiators surface through its venturi effect. ABS plastic to reduce weight and
eliminates rusting of the enclosure housing. No metal cooler housing acceptable.
• Remote mount two -stage, dry -type air intake filter with replaceable filter and
gravity evacuator and service indicator.
• B-CAN instrument panel to include:
I . Full sunlight visible, 3.5" color display with easy touch buttons, rugged IP
67 rating and capable of being mounted outside the vehicle.
2. USB compatible. No special laptop computer or software required.
Instrument panel can be re -flashed without being removed or sent into
manufacturer for re -programming to reduce downtime.
3. Integrated I/O module and display module.
4. No engine or transmission pinning or programming. Initial programming
provided by air compressor manufacture. (Consult factory for approved
applications- Some applications may require additional chassis options or
prograrruning).
5. To include quick connecting harnesses with sealed connections.
6. B-CAN safety interlocks to monitor on automatic transmissions: park
brake must be set, brake and accelerator pedal activation, engine RPM,
transmission gear, output RPM, J1939 connection, compressor
temperature, pressure, oil level, blow down, maintenance intervals and
shutdown limits.
7. B-CAN to offer end -user and service modes.
8. Monitor vehicle data through J1939 protocol that includes battery voltage,
engine RPM, fuel rate, engine load, coolant temperature, oil pressure,
current gear and transmission oil temperature.
9. B-CAN to log service intervals, shut downs and faults both active,
summarized and historical.
10. Shut down limitations to three occurrences within 1 hour of running time.
Compressor to be locked out after third occurrence and must be taken into
garage for servicing.
11. Quick testing of engine speed(s) and compressor fan.
• Color coded and size differentiated plastic control line tubing, fittings, and hoses
for Boss compressor system and hardware necessary for standard installation and
operation.
• Necessary warning and infonnation decals.
Revised: 5/2014
Supersedes:
Page 2 of 3
1761 Genesis Dr. • LaPorte IN 46350 9 219/324-7776 Phone • 219/324-7470 Fax
I I lines$@
eogineeredplgsystems
• Installation, operation and service manuals.
• Installation by factory or by factory authorized and trained distributor.
INSTALLATION OF AIR STORAGE TANKS
This rotary screw air compressor system is designed to provide continuous volume
and constant pressure without the use of an air storage tank. Within a few seconds of
engagement, the compressor will produce full volume and pressure needed to run
corresponding air operated equipment without waiting for air tanks to fill.
Air storage tanks are not utilized as standard equipment on vehicle mounted rotary
screw compressors. The installation of air storage tanks, if not done properly, will hinder
the performance of the rotary screw compressor. Boss Industries Inc. strongly
discourages the use of an air storage tank as standard equipment for vehicle mounted
rotary screw air compressors.
In the rare event air usage is required without operating the vehicle, an air storage
tank can be added to your system. When adding an air storage tank, be sure to follow all
state and federal DOT regulations regarding air storage tank usage.
Revised: 5/2014
Supersedes:
Page 3 of 3
1761 Genesis Dr. • LaPorte IN 46350.219/324-7776 Phone • 219/324-7470 Fax
CERTIFICATE OF INTERESTED PARTIES
FORM 1295
1of1
Complete Nos, 1- 4 and 6 if there are interested parties.
Complete Nos. 1, 2, 3, 5, and 6 if there are no interested parties.
OFFICE USE ONLY
CERTIFICATION OF FILING
Certificate Number:
2016-128072
Date Filed:
10/24/2016
Date Acknowledged:
10/24/2016
1
Name of business entity filing form, and the city, state and country of the business entity's place
of business.
Summit Truck Group
Lubbock, TX United States
2
Name of governmental entity or state agency that is a party to the contract for which the form is
being filed.
City of Lubbock
3
Provide the identification number used by the governmental entity or state agency to track or identify the contract, and provide a
description of the services, goods, or other property to be provided under the contract.
PO #31029878
2017-Kenworth T800 6x4 (with 5th wheel) and 2017 - International 4400 SBA 4x2 (with dump body)
4
Name of Interested Party
City, State, Country (place of business)
Nature of interest
(check applicable)
Controlling
I Intermediary
5
Check only if there is NO Interested Party.
X
6
AFFIDAVIT I swear, or affirm, under penalty of perjury, that the above disclosure is true and correct.
Signature of authorized agent of contracting business entity
AFFIX NOTARY STAMP / SEAL ABOVE
Sworn to and subscribed before me, by the said this the day of
20 , to certify which, witness my hand and seal of office.
Signature of officer administering oath Printed name of officer administering oath Title of officer administering oath
Forms provided by Texas Ethics Commission www.ethics.state.tx.us Version V1.0.277