HomeMy WebLinkAboutResolution - 2022-R0141 - PO 31065029 with MUNSON Boats 3.22.22Resolution No. 2022-RO141
Item No. 7.29
March 22, 2022
RESOLUTION
BE IT RESOLVED BY THE CITY COUNCIL OF THE CITY OF LUBBOCK:
THAT the Mayor of the City of Lubbock is hereby authorized and directed to
execute for and on behalf of the City of Lubbock, Purchase Order No. 31065029 for the
purchase of 26' PackCat Landing Craft Boat as per GSA Contract Number
GS07F0442M, by and between the City of Lubbock and Munson Boats of Burlington,
Washington, and related documents. Said Purchase Order is attached hereto and
incorporated in this resolution as if fully set forth herein and shall be included in the
minutes of the City Council.
Passed by the City Council on
ATTEST:
Rebe ca Garza, City Secrelz�
APPROVED AS TO CONTENT:
Erik Rejino, Assistant City Manager
APPROVED AS TO FORM:
elli Leisure, Assistant City Attorney
March 22, 2022
DANIEL M. POPE, MAYOR
ccdocs/RES.-PurchaseOrd 31048941 - Mack MRU 613
October 31, 2019
City of
.T Lubbock PURCHASE ORDER
TEXAS
MUNSON BOATS
TO: 15806 PRESTON PLACE
BURLINGTON WA 98233-3550
Page -
Date -
Order Number
Branch/Plant
1
3/4/2022
31065029 000 OP
3526
CITY OF LUBBOCK
SHIP TO: FLEET SERVICES
206 MUNICIPAL DRIVE
LUBBOCK TX 79404
INVOICE TO: CITY OF LUBBOCK
ACCOUNTS PAYABLE
P.O. BOX 2000
LUBBOCK, TX 79457 4BY:�
Marta A arez, Director of Purchasing & Contract Management
Ordered 3/4/2022 Freight
Requested 5/5/2023 Taken By
Delivery PER B STEVENS/ REQ 58583
GSA Contract # GS07FO442M
S BALLANCE
If you have any questions, please contact Brenda Stevens: BStevens@mylubbock. us or 806-775-2271
Description/Supplier Item Ordered Unit Cost UM— Extension Request Date
26' PACKCAT LANDING CRAFT BOAT 1.000 281,191.0000 EA 281,191.00 5/5/2023
IN V
GSA DISCOUNT 1.000 (7,030.0000) EA (7,030.00) 5/5/2023
INV
INDUSTRIAL FUNDING FEE 1.000 2,072.0000 EA 2,072.00 5/5/2023
mull
Total Order
Terms NET DUE ON RECEIPT 276,233.00
This purchase order encumbers funds in the amount of $276,233.00 awarded to Munson Boats of Burlington, WA,
on March 22 , 2022. The following is incorporated into and made part of this purchase order by reference: Quote
dated February 23, 2022, from Munson Boats of Burlington, WA, and GSA Contract Number GS07F0442M.
Resolution # 2022-R0141
CITY OF LUBB K
Daniel M. Pope, Mayor
ATTEST:
Reb ca Garza, City Secretary
Rev. 9/2021
Seller and Buyer agree as
follows:
PURCHASE ORDER
TERMS AND CONDITIONS
IMPORTANT: READ CAREFULLY
STANDARD TERMS AND CONDITIONS
CITY OF LUBBOCK, TX
1 SELLER TO PACKAGE GOODS Seller will package goods in accordance with good commercial practice
Each shipping container shall be clearly and permanently marked as follows (a) Seller's name and address,
(b) Consignee's name, address and purchase order or purchase release number and the supply agreement number
if applicable, (c) Container number and total number of containers, e g box I of 4 boxes, and (d) the number
of the container bearing the packing slip Seller shall bear cost of packaging unless otherwise provided Goods
shall be suitably packed to secure lowest transportation costs and to conform with requirements of common
carriers and any applicable specifications Buyer's count or weight shall be final and conclusive on shipments
not accompanied by packing lists.
2 SHIPhIENT UNDER RESERVATION PROHIBITED Seller is not authorized to ship the goods under
reservation and no tender of a bill of lading will operate as a tender of goods
3 TITLE AND RISK OF LOSS The title and risk of loss of the goods shall not pass to Buyer until Buyer
actually receives and takes possession of the goods at the point or points of delivery
4 NO REPLACEMENT OF DEFECTIVE TENDER Every tender of delivery of goods must fully comply
with all provisions of this contract as to time of delivery, quality and the like If a tender is made which does
not fully conform, this shall constitute a breach and Seller shall not have the right to substitute a conforming
tender, provided, where the time for performance has not yet expired, the Seller may reasonably notify Buyer
of his intention to cure and may then make a conforming tender within the contract time but not afterward
5 INVOICES & PAYMENTS a S e I I e r shall submit separate invoices, in duplicate, one each purchase
order or purchase release after each delivery Invoices shall indicate the purchase order or purchase release
number and the supply agreement number if applicable Invoices shall be itemized and transportation charges,
if any, shall be listed separately A copy of the bill of lading, and the freight waybill when applicable, should
be attached to the invoice Mail To Accounts Payable, City of Lubbock, P O Box 2000, Lubbock, Texas
79457 Payment shall not be due until the above instruments are submitted after delivery
6 GRATUITIES The Buyer may, by written notice to the Seller, cancel this contract without liability to
Seller if it is determined by Buyer that gratuities, in the form of entertainment, gifts or otherwise, were offered
or given by the Seller, or any agent or representative of the Seller, to any officer or employee of the City of
Lubbock with a view to securing a contract or securing favorable treatment with respect to the awarding or
amending, or the making of any determinations with respect to the performing of such a contract In the event
this contract is canceled by Buyer pursuant to this provision, Buyer shall be entitled, in addition to any other
rights and remedies, to recover or withhold the amount of the cost incurred by Seller in providing such gratuities
7 SPECIAL TOOLS & TEST EQUIPMENT If the price stated on the face hereof includes the cost of an)
special tooling or special test equipment fabricated or required by Seller for the purpose of filling this order,
such special tooling equipment and any process sheets related thereto shall become the property of the Buyer
and to the extent feasible shall be identified by the Seller as such
8 WARRANTY -PRICE a The price to be paid by the Buyer shall be that contained in Seller's bid
which Seller warrants to be no higher than Seller's current process on orders by others for products of the kind
and specification covered by this agreement for similar quantities under similar of like conditions and methods
of purchase In the event Seller breaches this warranty, the prices of the items shall be reduced to the
Seller's current prices on orders by others, or in the alternative. Buyer may cancel this contract without
liability to Seller for breach or Seller's actual expense. b The Seller warrants that no person or selling agency
has been employed or retained to solicit or secure this contract upon an agreement or understanding for
commission, percentage, brokerage, or contingent fee excepting bona fide employees of bona fide established
commercial or selling agencies maintained by the Seller for the purpose of securing business For breach of
viciation of this warranty the Buyer shall have the right in addition to any other right of rights to cancel this
contract without liability and to deduct from the contract price, or otherwise recover without liability and to
deduct from the contract price, or otherwise recover the full amount of such commission, percentage, brokerage
or contingent fee
9 WARRANTY -PRODUCT Seller shall not limit or exclude any implied warranties and any attempt to do
so shall render this contract voidable at the option of the Buyer Seller warrants that the goods furnished will
conform to the specification, drawings, and descriptions listed in thebid invitation, and to the sample(s) furnished
by the Seller, if any In the event of a conflict or between the specifications, drawings, and descriptions, the
specifications shall govern. Notwithstanding any provisions contained in the contractual agreement, the Seller
represents and warrants fault -free performance and fault -free result in the processing date and date related data
(including, but not limited to calculating, comparing and sequencing) of all hardware, software and firmware
products delivered and services provided under this Contract, individually or in combination, as the case may
be from the effective date of this Contract The obligations contained herein apply to products and services
provided by the Seller, its sub- Seller or any third party involved in the creation or development of the products
and services to be delivered to the City of Lubbock under this Contract. Failure to comply with any of the
obligations contained herein, may result in the City of Lubbock availing itself of any of its rights under the
law and under this Contract including, but not limited to, its right pertaining to terminatton or default The
warranties contained herein are separate and discrete front any other warranties specified in this Contract,
and are not subject to any disclaimer of warranty, implied or expressed, or limitation of the Seller's liability
which may be specified in this Contract, its appendices, its schedules, its annexes or any document incorporated
in this Contract by reference
10. SAFETY WARRANTY. Seller warrants that the product sold to the Buyer shall conform to the standards
promulgated by the U S. Department of Labor under the Occupational Safety and Health Act of 1970 In the
event the product does not conform to OSHA standards, Buyer may return the product for correction or
replacement at the Seller's expense In the event Seller fails to make the appropriate correction within a
reasonable time, correction made by Buyer will be at the Seller's expense
11. NO WARRANTY BY BUYER AGAINST INFRINGEMENTS. As part of this contract for sale Seller
agrees to ascertain whether goods manufactured in accordance with the specifications attached to this agreement
will give rise to the rightful claim of any third person by way of infringement of the like Buyer makes no
warranty that the production of goods according to the specification will not give rise to such a claim, and in no
event shall Buyer be liable to Seller for indemnification in the event that Seller is sued on the grounds of
infringement of the like If Seller is of the opinion that an infringement or the like will result, he will notify the
Buyer to this effect in writing within two weeks after the signing ofthis agreement If Buyer does not receive
notice and is subsequently held liable for the infringement or the like, Seller will save Buyer harmless If
Seller in good faith ascertains the production of the goods in accordance with the specifications will result in
infringement or the like, the contract shall be null and void
12 NON APPROPRIATION All funds for payment by the City under this contract are subject to the
availability of an annual appropriation for this purpose by the City. In the event of nonappropriation of funds
by the City Council of the City of Lubbock for the goods or services provided under the contract, the City will
terminate the contract, without termination charge or other liability, on the last day of the then -current fiscal
year or when the appropriation made for the then -current year for the goods or services covered by this contract
is spent, whichever event occurs first If at any time funds are not appropriated for the continuance of this
contract, cancellation shall be accepted by the Seller on thirty (30) days prior written notice, but failure to give
such notice shall be of no effect and the City shall not be obligated under this contract beyond the date of
termination
13 RIGHT OF INSPECTION Buyer shall have the right to inspect the goods at delivery before accepting
them
14 CANCELLATION Buyer shall have the right to cancel for default all or any part of the undelivered
portion of this order if Seller breaches any of the terms hereof including warranties of Seller or if the Seller
becomes insolvent or commits acts of bankruptcy Such right of cancellation is in addition to and not in
lieu of any other remedies which Buyer may have in law or equity.
15 TERMINATION The performance of work under this order may be terminated in whole, or in part by the
Buyer in accordance with this provision Termination of work hereunder shall be effected by the delivery
of the Seller of a "Notice of Termination" specifying the extent to which performance of work under the
order is terminated and the dale upon which such termination becomes effective Such right or termination is
in addition to and not in lieu of the rights of Buyer set forth in Clause 14, herein
16 FORCE MAJEURE Neither party shall be held responsible for losses, resulting if the fulfillment
of any terns of provisions of this contract is delayed or prevented by any cause not within the control of the
party whose performance is interfered with, and which by the exercise of reasonable diligence said party is
unable to prevent
17 ASSIGNMENT -DELEGATION No right or interest in this contract shall be assigned or delegation of
any obligation made by Seller without the written permission of the Buyer Any attempted assignment or
delegation by Seller shall be wholly void and totally ineffective for all purpose unless made in confornitywith
this paragraph
I8 WAIVER No claim or right arising out of a breach of this contract can be discharged in whole or in part
by a waiver or renunciation of the claim or right unless the waiver or renunciation is supported by
consideration and is in writing signed by the aggrieved party
19 INTERPRETATION -PAROLE EVIDENCE This writing, plus any specifications for bids and
performance provided by Buyer in its advertisement for bids, and any other documents provided by
Seller as part of his bid, is intended by the parties as a final expression of their agreement and intended also
as a complete and exclusive statement of the terms of their agreement Whenever a term defined by the
Uniform Commercial Code is used in this agreement, the definition contained in the Code is to control.
20 APPLICABLE LAW This agreement shall be governed by the Uniform Commercial Code Whereever
the term "Uniform Commercial Code' is used, it shall be construed as meaning the Uniform Commercial
Code as adopted in the State of Texas as effective and in force on the date of this agreement
21 RIGHT TO ASSURANCE. Whenever one parry to this contract in good faith has reason to question
the other parry's intent to perform he may demand that the other party give written assurance of his intent to
perform In the event that a demand is made and no assurance is given within five (5) days, the demanding
party may treat this failure as an anticipatory repudiation of the contract
22 INDEMNIFICATION Seller shall indemnify, keep and save harmless the Buyer, its agents, officials and
employees, against all injuries, deaths, loss, damages, claims, patent claims, suits, liabilities, judgments, costs
and expenses, which may in anywise accrue against the Buyer in consequence of the granting of this Contract
or which may anywise result therefrom, whether or not it shall be alleged or determined that the act was
caused through negligence or omission of the Seller or its employees, or of the subSeller or assignee or its
employees, if any, and the Seller shall, at his own expense, appear, defend and pay all charges of attorneys
and all costs and other expenses arising therefrom of incurred in connection therewith, and, if any judgment
shall be rendered against the Buyer in any such action, the Seller shall, at its own expenses, satisfy and
discharge the same Seller expressly understands and agrees that any bond required by this contract, or
otherwise provided by Seller, shall in no way limit the responsibility to indemnify, keep and save harmless
and defend the Buyer as herein provided
23 TIBIE It is hereby expressly agreed and understood that time is of the essence for the performance of
this contract, and failure by contract to meet the time specifications of this agreement will cause Seller to
be in default of this agreement.
24 hIBE The City of Lubbock hereby notifies all bidders that in regard to any contract entered into
pursuant to this request, minority and women business enterprises will be afforded equal opportunities to
submit bids in response to this invitation and will not be discriminated against on the grounds of race, color,
sex or natural origin in consideration for an award
25 NON -ARBITRATION. The City reserves the right to exercise any right or remedy to it by law, contract,
equity, or otherwise, including without limitation, the right to seek any and all forms of relief in a court of
competent jurisdiction. Further, the City shall not be subject to any arbitration process prior to exercising
its unrestricted right to seek judicial remedy The remedies set forth herein are cumulative and not exclusive,
and may be exercised concurrently To the extent of any conflict between this provision and another provision
in, or related to, this document, this provision shall control
26 RIGHT TO AUDIT. At any time during the term of the contract, or thereafter, the City, or a duly
authorized audit representative of the City or the State of Texas, at its expense and at reasonable times,
reserves the right to audit Contractors records and books relevant to all services provided to the City under
this Contract In the event such an audit by the City reveals any errors or overpayments by the City,
Contractor shall refund the City the full amount of such overpayments within thirty (30) days of such
audit findings, or the City, at its option, reserves the right to deduct such amounts owing the City from any
payments due Contractor.
27 ASSIGNING OR SUBLETTING THE CONTRACT The Contractor shall not assignor sublet the contract,
or any portion of the contract, without written consent from the Director of Purchasing and Contrac.
Management Should consent be given, the Contractor shall insure the Subcontractor or shall provide proof on
insurance from the Subcontractor that complies with all contract Insurance requirements.
29 HOUSE BILL 1295 DISCLOSURE OF INTERESTED PARTIES House Bill 1295, adopted by the 846
Legislature, created §2252 908, Texas Government Code. Section 2252 908 requires a business entity enterinE
into certain contracts with a governmental entity or state agency- to file with the governmental entity or statt
agency a disclosure of interested parties at the time the business entity submits the signed contract to thi
governmental entity or state agency. Instructions for completing Forth 1295 are available at
%p {1,nnv ci lubbock tx us�dcoastmenta!-websirex+dem,�It>entalpurehasin&'vendor-nr Formation
30 CONTRACTOR ACKNOWLEDGES, by supplying any Goods or Services that the Contractor has read
fully understands, and will be in full compliance with all terms and conditions and the descriptive materia:
contained herein and any additional associated documents and Amendments The City disclaims any terns anc
conditions provided by the Contractor unless agreed upon in writing by the parties In the event of conflic
between these terms and conditions and any terms and conditions provided by the Contractor, the terms anc
conditions provided herein shall prevail The terms and conditions provided herein are the final terms agree(
upon by the parties, and any prior conflicting terms shall be of no force or effect
31 TEXAS GOVERNMENT CODE, CHAPTER 2252 The undersigned representative of the undersign(
company or business, being an adult over the age of eighteen (I8) years of age, pursuant to Texas Govemmen
Code, Chapter 2252, Section 2252 152, certify that the company named above is not listed on the website o.
the Comptroller of the State of Texas concerning the listing of companies that are identified under Sectior
806 051, Section 807 051 or Section 2253 153 I further certify that should the above -named company ente
into a contract that is on said listing of companies on the website of the Comptroller of the State of Texas, whict
do business with Iran, Sudan or any Foreign Terrorist Organization, I will immediately notify the City o.
Lubbock Purchasing and Contract Department
32 TEXAS GOVERNMENT CODE, CHAPTER 2270 This section applies only to a contract that (1) i!
between a governmental entity and a company with 10 or more full-time employees, and (2) has a value o
$100000 or more that is to be paid wholly or partly from public funds of the governmental entity (b) A
governmental entity may not enter into a contract with a company for goods or services unless the contra(
contains a written verification from the company that it (1) does not boycott Israel, and (2) will not boycot
Israel during the term of the contract
33 TEXAS PUBLIC INFORMATION ACT The requirements of Subchapter J, Chapter 552, Govemmen
Code, may apply to this contract and the contractor or vendor agrees that the contract can be terminated if thr
contractor or vendor knowingly or intentionally fails to comply with a requirement of that subchapter To thi
extent Subchapter J, Chapter 552, Government Code applies to this agreement, Pursuant to Section 552 301(c
of the Texas Government Code, the City of Lubbock has designated the following email address for whicl
public information requests may be made by an emailed request Please send this request to this email addres
for it to be processed LrTL&
REV 9/2021
MUNSON
15806 Preston Place, Burlington WA USA 98233
Phone: 360 707 2752 Fax: 360 757 2442
www.munsonboats.com Jesse@MunsonBoats.com
February 23, 2022
Specification And Quotation
For One
26' PackCat Landing Craft
For
Lubbock Fire Rescue
Contact: Gary Vaughn
Phone: 806-775-3603
Email: gjvaughn@mylubbock.us
MUN- 26 LFR
OVERVIEW: The following describes a 26' PackCat welded aluminum catamaran landing craft
(U.S. Patents D739331S and 8281730B2) 2022 production model. Detailed drawings will be
submitted for approval prior to construction. Boat shall exit the factory as a completed vessel,
adhering to the following specifications. Pricing per GSA Contract Number GS07F0442M. An
asterisk (*) following a line item indicates a custom item.
GENERAL SPECIFICATIONS:
1. Hull Length: 26 feet
2. Beam: 8 feet 6 inches
3. Transom Deadrise: 24 degrees each hull section
4. Person and Cargo Capacity: 2400 Ibs
5. Propulsion: Twin 200hp Mercury Four Stroke Outboard Motors
6. Fuel Capacity: 150 gallons
7. Bow Door Clearance: 64 inches
8. Bottom Plate: 1/4 inch 5086-H116
9. Side Plate: 1/4 inch 5052-H32
10. Deck Plate: 3/16 inch 5052-H32
11. Centerline Vertical Keel (CVK): 3/8" x 3" 6061-T6
26' PackCat landing craft incorporating two symmetrical longitudinally aligned hull sections with
241 deadrise, a low profile tunnel connecting the two longitudinally aligned hulls, and 64" wide
bow door.
1
The tunnel shall be in the water at rest to add stability and floatation.
Hull shall include watertight structural bulkheads.
8" welded aluminum inspection hatches shall be installed to provide access to all below deck
compartments.
Six (6) 10" welded aluminum cleats shall be installed. (3 Per Side)
A 3/4" aluminum double padeye shall be welded on centerline of the bow.
1/4" rolled plate, 7" radius bow corners shall be installed on the port and starboard sides of the
bow door opening.
The transom shall be setup for outboard power and set at 103 degrees off baseline for proper
outboard trim
The motor well shall be self -bailing via two 2.5" pipe drains running out through transom. Drains
shall be equipped with rubber flappers to divert water from entering slop well when operating the
boat in reverse.
The stern shall incorporate a full width cross seat/locker forward of the motor well. Lockers will
house batteries and fuel filter systems and offer general storage. Locker will have two (2) 3/16"
welded aluminum weatherproof hatches with 1-1/2" angle aluminum frame, key lockable 316
series Stainless Steel "T" handle latches, welded 100mm aluminum hinges with grease fitting and
Stainless Steel pins, and 1/8" thick PORON neoprene hatch seal.
316 Series Stainless Steel fastening hardware shall be used throughout the vessel.
The hull and superstructure shall be constructed of marine grade aluminum and MIG welded
throughout.
All weld seams in the hull shall be welded 100%, both interior & exterior.
All welding shall be performed in accordance with American Welding Society D1.2-2003
procedure qualifications.
All surface areas shall be shiny, mill finish, with no grind marks, splatters, or blemishes.
11/4" Sch 40 pipe safety railings shall be installed 32" above main deck along port & stbd sides
from stern to midship.
Two (2) 1/4" x 4" Beaching wear plate shall be installed, one on each bow forefoot.
Two (2) 26" wide side doors shall be installed. Doors shall swing inboard and forward in
direction, and lock in the closed position.
2
Six (6) Open scuppers installed flush with the deck at midship and two (2) large pipe drains in
the stern shall create a self -bailing main deck. Drains and scuppers shall be sized and installed in
accordance with ABYC deck drainage requirements.
Two (2) 15" x 24" welded aluminum deck hatches shall be installed on the main deck.
Johnson Duramax DB-503 3" D-rubber fender shall be installed on the gunwale, port and
starboard sides. D-rubber shall be permanently attached with a full length capture rail 100%
welded to the hull and mechanically fastened on each end to prevent "shrinkage" in cold
temperatures. All breaks in the D-Rubber shall be capped with welded aluminum, interruptions
shall be flat plate, terminations shall be angled aluminum tubing to create a smooth transition.
(Skip welding techniques shall not be used)
Large 3" D-rubber push knees shall be installed on the port & starboard sides of the bow door.
Push knees shall be 1/4" plate double wall construction and shall extend down near the waterline
for pushing up to docks.
One (1) Divers Dream 5 lb zinc anode shall be installed on a bracket that is welded to the
transom.
A bimini top with stainless steel frame and marine grade canvas shall be installed over the main
deck.
BOW DOOR OUTFITTING:
A 64 inch wide drop down bow door shall be installed to enable personnel transport.
The hull shall incorporate port and starboard bow lockers framing the door opening.
A 12V Warn VRX-35 winch spooled with 50' of synthetic line shall be installed for opening and
closing the bow door.
The winch cable runs through stainless steel cheek pulleys on each side of the door providing
equal tension on both sides when opened and closed. Aluminum roller sheaves shall be installed
on the gunnel.
The bow door shall be outfitted with two (2) 3/4" stainless steel positive locking pin to prevent the
bow door from opening while underway.
A replaceable rubber gasket seals the bow door watertight when closed.
The inside face of the bow door shall be double plated for a smooth working surface.
Switches to operate the bow door shall be installed locally and at the main console.
The port and starboard bow door lockers shall be extended aft and incorporate weatherproof
lockable hatches to provide additional storage.
Dual 75 gallon non -integral fuel tanks shall be installed complete with fill, vent, 12V sender and
3
fuel level gauge on console. Fuel tanks shall be built from 1/4" plate, pressure tested to 4 psi and
bolted into hull framing using doublers and stainless steel fasteners.
Two (2) fuel filter/water separators shall be installed complete with shut off valves. Filters to be
Racor 320 or equivalent.
Fuel system shall comply with U.S. diurnal emission standards.
12V 140 CFM bilge blower installed in fuel tank compartment.
CONSOLE:
A 54" wide console T-top shall be installed aft on centerline with 94" wide x 144" long roof.
T-top includes four (4) fixed windows with forward leaning windshields, an overhead radio bar,
angled aluminum control console, and a flush mounted bolt on console access panel on the
forward side of the console for ease of maintenance and future upgrades.
The aft side of the console shall include 3/16" welded aluminum weatherproof hatches with 1
-1/2" angle aluminum frame, key lockable 316 series Stainless Steel "T" handle latches, welded
100mm aluminum hinges with grease fitting and Stainless Steel pins, and 1/8" thick PORON
neoprene hatch seal.
The T-top roof shall incorporate 1" pipe roof railings, and vertical grab rails on port and starboard
sides.
One (1) Cup holders shall be installed at the console.
A two person upholstered leaning post/seat shall be installed at the console.
One (1) Exterior seat locker shall be installed on the front of the console. The locker storage
compartment is accessed through 3/16" welded aluminum weatherproof hatches with 1-1/2"
angle aluminum frame, 316 series stainless steel "T" handle latches, welded 100mm aluminum
hinges with grease fitting and stainless steel pins, and 1/8" thick PORON neoprene hatch seal.
TOWING:
A 4" Sch 80 aluminum pipe tow bitt with 1" 316 stainless crucifix pin shall be installed aft on
centerline. The towing bitt shall be sized to accept one round turn and three figure eight's of the
towline.
A line parting knife shall be mounted in the vicinity of the tow bit.
Vessel will include an anchor package consisting of one (1) 221b Rocna anchor, 15' of 5/16"
galvanized chain and 150' of 9/16" 3-strand Proset anchor line.
Proper storage for the anchor shall be provided.
An anchor pulpit shall be installed on the vessel complete with a 12V Lewmar 1000 anchor
n
windlass. Anchor shall be secured in the "up" position by a pin or chain tensioner (dependent on
space and application). Pulpit shall have 1/2" bull horns to prevent the anchor rode from slipping
off the roller.
DIVING:
Eight (8) Roll Control tank holders shall be installed to accommodate compressed air tanks
(scuba tanks).
A removable flip out dive ladder shall be installed on the bow door.
A removable side door dive ladder shall be included with the vessel. Storage for ladder will be
provided.
STERN GUARDS AND PLATFORMS:
A fixed aluminum guard made from 2" aluminum pipe shall be welded to the transom to protect
the outboard motors.
One (1) small welded aluminum swim step with non-skid shall be installed centerline on the
transom.
TRIM TABS:
9" x 12" Lenco electric trim tabs shall be installed.
The vessel's electrical system shall be 12vDC.
All electrical cable shall be marine grade copper tinned boat cable and labeled for each circuit.
Cables should be routed in wireways wherever possible. Wherever exposed to potential damage,
cables shall be protected with rubber.
Electrical cable shall be sized in accordance with the American Boat & Yacht Council.
All electrical cables shall be marked in accordance with the markings in electrical drawings.
All electrical switches shall be of a heavy-duty type and properly insulated.
The electrical system shall be grounded. In any case the hull shall not be used as part of a
galvanic feeding loop.
12V DC ACCESSORIES:
One (1) 12V 6 position waterproof distribution panel shall be installed on the console.
A pair of 12V self -parking windshield wipers shall be installed on the forward windshields. Each
wiper assembly consists of a fully sealed, marine rated wiper motor fitted with a heavy duty
5
pantographic wiper arm and matching blade.
One (1) 12V air trumpet horn shall be installed with momentary push button on dash.
One (1) 12V power receptacle with weather cover shall be installed.
One (1) Dual USB outlet shall be installed in the vessel, this outlet enables the charging of USB
devices.
Two (2) 12V 2200 GPH bilge pumps shall be installed with auto float switch.
LED navigation lights shall be installed to USCG requirements.
One (1) 12V LED red/white dome light shall be installed over the operator.
Four (4) Imtra Offshore 5-LED flood light(s) shall be installed on the wheelhouse roof.
One (1) Whelen Century 23" LED blue light bar shall be installed on the wheelhouse roof.
Controls for the light bar shall be installed at the console.
A Garmin 1042xsv - 10" screen GPS Plotter/Sounder shall be installed on the vessel. This includes
local area maps, GPS antenna, transom mounted transducer, and installation.
A Garmin GMR 18HD+ 18" radar shall be integrated into the navigation system. This system
features a 4kW beam and 36 nautical mile range.
The radar dome shall be mounted on a removable 3" diameter Pipe mount.
A Garmin VHF 215 Marine Radio shall be installed complete with Shakespeare antenna and Sea
Dog Lily mount.
A Whelen WPA1 siren system with 100W speaker horn shall be installed on the vessel. The
system controller and microphone shall be installed at the console.
A Fireboy automatic engine room flooding fire extinguishing system to be installed with manual
pull cable at operator console.
Matson Industrial Floor Grip Non-skid deck coating shall be applied to all main deck walking
surfaces. (Color- 223 Gray)
Hull to remain bare aluminum finish (No Bottom Paint)
Non -reflective vinyl graphics shall be applied. (Specifics to be determined after order has been
6
received)
A U.S. Coast Guard rating placard shall be installed at the dash.
A bow door warning placard shall be installed adjacent to the bow door.
Bow door switch to be mounted on a bow door switch placard.
Secondary bow door switch to be mounted on a bow door switch placard.
Twin 200 HP Mercury FourStroke outboard engines (200XL & 200CXL) with 25" shafts and
stainless steel propellers shall be installed.
A hydraulic steering system shall be installed. Installation includes a helm pump, steering
cylinder, tie bar and lines.
A two -battery engine start bank shall be installed. Batteries are connected by selector switches,
allowing each engine to be started via either battery or with both batteries in parallel.
The main helm station shall be installed with twin -engine mechanical binnacle with throttle and
shift cables, VesselView 502 multifunction display, dual 4-position key switches and emergency
stop lanyard.
The VesselView 502 display shall be interfaced with GPS for speed, position, and fuel tracking.
Engines shall be installed on Bob's Machine Shop Gen3 hydraulic jack plates. Designed for use in
shallow water operations, they provide 6" of vertical travel while underway.
Jack plates shall include LED position gauges located on the main console.
A machinery compartment shall be installed in the aft deck.
The machinery compartment shall be one compartment and shall include an access hatch. The
hatch shall be large enough to remove the fire pump engine. A gas ram shall be installed to hold
the hatch up while in the open position.
The machinery compartment shall be ventilated for natural ventilation and combustion air intake.
Hale Class 1 PowerFlow HPX450-B35 fire pump capable of producing 550 GPM @ 45 PSI PSI, 400
GPM @ 75 PSI and 250 GPM at 100 PSI shall be installed in a ventilated locker. The fire pump is
powered via an air-cooled 35 HP Briggs and Stratton engine. The fire pump has a 4" intake and
3" discharge.
A diaphragm hand primer pump shall be plumbed to the pump impeller for priming the main
pump.
7
A remote mounted control panel shall be installed in the co-pilot position of the dash. Panel
includes start/stop, choke, throttle, oil pressure light and water pressure gauge.
The pump shall have a dedicated battery start bank tied via crossover switch to the main engine
start bank.
A 9" Delta-T fan shall be installed for ventilating and cooling the fire pump locker.
Fire pump shall be installed with a welded aluminum thru-hull 6" suction and removable sea
strainer affixed to the underside of the hull. The suction line will be outfitted with a section of 6"
'soft' hose to buffer vibration between the pump and intake. Intake shall include a serviceable
sea chest /clean out capped with an 6" cam-lok cover.
A 316SS manually -operated 4" butterfly valve shall be installed to isolate the thru-hull and aid in
maintaining pump prime.
Pump will supply a 3" diameter fire main running forward.
A 3" fire main branch shall extend to the port bow and terminates at a fire monitor station. A 3"
ball valve located in the fire locker below controls water flow to the monitor station.
A 2.5" discharge shall be located at the port bow monitor station. This discharge will be outfitted
with a Task Force Tips 2.5" NHF x (2) 1.5" NHM gated wye. The gated wye includes integrated
quarter turn ball valves with handles for positive shutoff.
The 1.5" outlets shall both have anodized aluminum blind caps to protect threads when not in
use.
An Elkhart Brass Stinger 2.0 monitor rated at 1250 GPM shall be installed at the port bow monitor
station. The monitor has a 3" ANSI flange inlet and a 2.5" NHM outlet.
A Master Stream "X-Stream" SM-1250 Select-O-Matic nozzle shall be included. The nozzle can
vary from a straight stream to a wide fog pattern.
Vessel shall include one (1) EZ Loader TAB 23-27 9,OOOIb capacity aluminum triple axle trailer
complete with brakes on all three axles, 2-5/16" ball receiver, manual strap winch, safety chain,
heavy duty jack stand, DOT approved lighting, spare tire with carrier. Bunks to have strap
notches to aid in picking the boat.
SEA TRIALS;
Vessel shall undergo testing (Sea Trials) after completion to verify proper function and
performance of all systems.
One (1) Operation & Maintenance Manual shall be supplied with the craft. Includes OEM
technical literature for all supplied equipment, operator/safety instructions, as -built boat
0
drawings, as -built electrical system drawings.
Vessel to include two (2) complete key sets. (Doors, Hatches, Ignition)
Original Bill of Sale and Manufacturer's Statement of Origin documents shall be delivered with the
boat conveying free and clear title(s).
Total For GSA Items: $281,191.00
GSA Discount (2.5%): $7,030.00
Adjusted Price: $274,161.00
Industrial Funding Fee (IFF): $2,072.00
TOTAL GSA PRICE, EX -WORKS, BURLINGTON WA: $276,233.00
For William E. Munson Company,
Jesse Munson, CEO
9